Audited Supplier
Filling glue for cable accessories
ISO
Cable
Red
IP50
Hexagon
Rubber
YQALT
Bags Cartons
filler mastic 25*350mm*1.5mm (white)
China
3917310000
Product Description
Sealing mastic, red sealing gum, yellow stress relief mastic, void filling gumSealing compound of red, yellow, grey and black color
Tape 55 stress relief mastics
Tape 65 anti tracking waterproof sealing mastics
Tape 75 black void filling mastics
This kind of material has good thermal stability, flame retardancy, flexibility, non-cracking and tracking resistance, and has excellent electrical properties, which can meet the engineering insulation elements of various switchgears, and is widely used in the insulation protection of substations and high and low voltage switchgear busbars.
1. Increase insulation to prevent short circuit accidents of small animals;
2. Anti-condensation flashover, anti-pollution flashover;
3. Prevent maintenance personnel from mistakenly entering the live gap;
4. Enhance the insulation performance between switchgears and effectively reduce the volume of switchgears;
5. Special protection of electrical shortcuts to prevent foreign objects from overlapping;
6. Comprehensive anti-corrosion.
| product name | sealing glue Sealant / filling glue |
| Product color | Red, yellow |
| product appearance | Soft self-melting tape or roll |
| going | -40ºC~90ºC |
Filling glue (yellow) | Product characteristics: strong self-adhesion, with good conformity for the irregular surface |
| Scope of application: used with heat shrinkage or cold shrinkage materials, used for crosslinking cable terminal and intermediate joints, filling insulation, air insulation, water insulation and sealing role | |
| Instructions for use: wipe the cable skin and clean, with this glue on the cable into a round or oval, cover the heat or cold shrink pipe, with the heat shrinkable or cold shrink pipe contraction, the glue becomes soft, the air in the pipe discharge, filling and sealing role, moisture-proof gas, water resistance and sealing role | |
sealant (red) | Product characteristics: high bonding strength, sealing, good waterproof Weather resistance, and aging resistance Good elasticity, good shape, simple and flexible to use |
| Scope of application: bonding and sealing of cold and heat shrink outdoor pipe joints of power cable accessories, and bonding of umbrella skirt and sealing bonding parts used in the high pressure head. Bond sealing of electrical equipment connectors (including lead outlet) and cable interfaces or lead outlet of electrical control equipment in aerospace, aviation, ship and rail transit fields. | |
| Instructions for use: clean the parts of the adhesive, no dust, oil, etc. Stretch the tape to 1 / 2 of the original width, 1 / 2 lap winding tape, multi-layer winding, so that the thickness of the waterproof adhesive is not less than 2mm, the width is about 5cm, the close by hand compaction, check whether the adhesion is good. |
