3MP wifi Doorbell Camera
Pixels: 3MP Full HD picture quality
Lens: 2.8mm field of view
diagonal 156°, horizontal 114°, vertical 82°
IR light type: 2 high-power dot matrix infrared LED
Current:
standby current: 0.42mA; daytime: 264mA; nighttime: 588mA
Product size: 144 mm × 46 mm × 31 mm
Product weight: 222 g
Chime Product size: 65 mm × 65 mm × 20 mm Power supply voltage: 5V Product weight: 44g
| Specs | ||
| Camera | Sensor | 1/2.8" CMOS |
| Focal Length | 2.8 mm | |
| Optical Field of View | 156° diagonal, 114° horizontal, 82° vertical | |
| Minimum Illumination | 0.01 lux | |
| Audio | Input | Built-in microphone |
| Output | Built-in speaker | |
| Two-way Audio | Full duplex | |
| Audio Compressing | AAC | |
| Video | Video Compressing | H.264, H.265 |
| Lighting Frequency | 50 Hz, 60 Hz | |
| Frame Rate | 15 fps | |
| Maximum Resolution | 2048 × 1536 | |
| Light Source For Night Vision | Infrared LED | |
| Network | Wireless Standard | Wi-Fi: 2.4 GHz (IEEE 802.11 b/g/n) FSK: 915 MHz, 868 MHz, 433 MHz |
| Protocols Supported | TCP/IP, UDP/IP, DHCP, RTMP, MUTP, FSK | |
| IP Address Type | Dynamic IP address | |
| Recording | Recording Method | Alarm triggered recording, and manual recording |
| Video Storage | Cloud storage, local Micro SD card (up to 128 GB), and mobile phone memory | |
| Function | AI Function | Human detection, vehicle detection, pet detection, package detection, activitiy zone |
| Wake-up Method | PIR body induction wake-up, remote wake-up and button to wake up | |
| Alarm Notification | Alarm push by mobile app, indicator light flashing and alarm sound warning | |
| Indicator | RGBY four-color LED | |
| Compatibility of Mechanical chime and Smart speaker | Mechanical Chime, Alexa and Google Home supported | |
| Battery | Capacity | 5200 mAh or 6700 mAh optional |
| Removability | Unremovable | |
| Working Time | 5 months (recording 20 pieces of 10-second video per day) | |
| Standby Time | 1 year | |
| Charging Voltage | DC: 5 V ±5% AC: 8 V ~ 24 V | |
| Charging Time | Within 10 hours (DC) | |
| Protection | Over-charge, over-discharge, over-current, short circuit and charging protection at high and low temperature | |
| Power Consumption | Standby | 3 mW |
| Daytime Working | 1 W | |
| Nighttime Working | 2.5 W | |
| Interface | Power | Micro USB |
| Storage | Micro SD card | |
| Key | Power key, doorbell key and reset key | |
| Installation | Installation Method | Bracket installation |
| Bracket Type | Standard for flat brackets, optional for left and right tilt brackets and up and down tilt brackets | |
| Tamper-proof | Structural tamper proof | Tools required for removal |
| Electronic tamper proof | Alarm sound and push mobile phone message when illegally remove (optional) | |
| Environment | Dustproof and Waterproof | IP65 |
| Operating Temperature | -10 ºC ~ 45 ºC | |
| Storage Temperature | -20 ºC ~ 60 ºC | |
| Prodoct Dimension | Dimension | 144 mm × 46 mm × 31 mm (without bracket) |
| Material | PC | |
| Color | Whtie | |
| Certification | Certification | CE, FCC, RoHS, WEEE, MSDS, UN38.3, UL62368 |
| Specs | ||
| Charger | Power interface | Micro USB |
| Charging Voltage | DC 5 V | |
| Network | Communication frequency | 915 MHz, 868 MHz, 433 MHz |
| Communication protocol | FSK | |
| Audio | The number of Ringtone | Five types ringtone |
| Ringtone Type | Chord | |
| Ringtone Loudness | Highest 85dB at 1 meter | |
| Installation | Indoor or outdoor | Indoor |
| Installation Method | Desktop placement | |
| Pairing | Multi-machine pairing | Support one doorbell with multiple chime, one chime with multiple doorbells supported |
| Pairing factory setting | Yes | |
| Button and indicator light | Button | Pairing, ringtone selection, volume up, volume down |
| Indicator light | Red and blue two-color LED | |
| Environment | Operating Temperature | -10 ºC ~ 45 ºC |
| Storage Temperature | -20 ºC ~ 60 ºC | |
| Prodoct Dimension | Dimension | 65 mm ×65 mm × 20 mm |
| Material | PC | |
| Color | White | |
| Certification | Certification | CE,FCC,RoHS,WEEE |
















Q1: Are you a factory or trading company?
A1: We are factory and trading company.
Q2: How about the Shipping Method?
A2: DHL/UPS/Fedex and other air shipments and sea shipments are all workable. In one words, we could do any shipments you wanted.
Q3:What is your method of payment?
A3:Support T/T, LC, Western Union, Trade Assurance and more.
Q4:Can we print our logo on the product?
A4:Yes, sure
Q: What's the MOQ?
A: Depending on your requirement. Welcome contact us for more detail.
About OEM/ODM:Our minimum order qty is 50pcs each model, but we support small test order for all customer.
Q5.Can we get a sample?
A5:Sure,but we need to charge for samples,we will return sample fee in later order.


Audited Supplier









