Audited Supplier
International Standard ISO 13918
CD Welding Insulation Pin
IKING's cup-head pin weld fasteners allow the fixing of insulation material on sheet metal such as HVAC system (airducts/air ducts) in a single operation. Our welding machine ensures a high quality of weld on sheet metal up to a thickness of several centimetres. Due to long cables and to light weight, this machine is useful on construction site.
This machine uses the capacitors discharge technique and allows clips to be welded without overheating mark on the opposite side of the metal sheet.
The cup head pin consist of a steel pin firmly mounted on a galvanised steel washer. And cup-head-pin with plastic sleeve are similar except that the shank is partially insulated. Thanks to this insulated shank and the use of the CHP gun, it is possible to fasten aluminium faced insulation.
Cup Head Weld Pins | |
Specification | 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 4-1/2" |
Material | Pin: Stainless steel, carbon steel, copper, alloy |
Base: high stength Galvanized steel, stainless steel | |
Surface treatement | Copper plated or Galvanized plated. |
Products Features | Simple construction, high efficiency, save manpower; Easy weld to fasten the insulation; Sharp pins easily go through; Cup head pins with paper washers are used for aluminum foil faced insulation; Cup head pins with sleeves are sued for tin foil faced insulation; Length tolerance ±0.1mm. |
Packing | Plastic Bag+ Carton or as customer requires |
Production Capacity | 10000 Pcs/hour |
Delivery | Within 15-20 days after confirming the deposit |
Application | fasten the insulation or insulation sheet, such as air duct work insulation, marine |
1. The capacitor battery will be charged according to chosen charging voltage.2. The stud (with ignition tip) is placed onto the work piece and pressed by a spring in the welding gun onto the work piece (contact). The current circuit is closed.
3. After triggering the welding process, the rapidly increasing current evaporates the ignition tip and ignites the arc.
4. Stud and work piece are melted.
5. The stud is moved forward to the plate.
6. The arc is cut as soon as the stud touches the work piece
7. The molten zones are joining and solidifying.
8. Welding time is ≤ 3 msec.
9. Recommended plate thickness should be 1/10 d, but not less than 0.5 mm.
Applications
Our Company
China IKING Industrial Group
We, China IKING Group, are the manufacture of stud connectors and welding machines, and with over 30 years outstanding experiences in this field, quality products can be supplied with CE, ISO certificate etc. Honorable clients of China IKING includes NELSON STUD (China), SWP (UK), CSCEC etc., and all that successful experience would pave the way for our successful cooperation in the future.
Certifications
Packing & Delivery
Cartons+wooden pallet
2. Generally, 1 x 20' GP container can load about 16-20 pallets.
FAQ
Q: Why I need to choose China IKING?
A: 1. All of our materials are qualified mild carbon steel (SWRCH18A) from Xingtai Steel Factory.
2. The phosphating pretreatment starts from the raw material with drawing machine.
3. To ensure better mechanical property and conform to BS EN 13918:2008, AWS D1.1 etc., the biggest factory in Zhejiang, China provides us the multi-station cold forging machine.
4. Aluminum balls at the bottom are installed by the automatic riveting machine.
5. IKING's studs will be good as new after a long time of shipping on the sea with rust prevention.
6. With our well-managed production arrangement, the delivery time is much shorter than our rivals.
