Audited Supplier
LT-SRST
Insulators, Electrical Winding Insulation, Motor
Black, Red, Yellow, Green, Blue, White
Silicone Rubber
20KV~100KV
220 220
10mm~50mm
3~20 Meters Per Roll
0.30mm, 0.50mm
Black, Red, Yellow, White, Blue, Green
-50°c~250°c
H
Solid
Inorganic Insulation
Organic Insulating Material
ISO9001
Lontom
LONTOM
Carton
Shanghai, China
39269090
Product Description
Self-Fusing Rescue Tape is made of the highest quality materials for a permanent air-tight and water-tight seal in emergency situations. It is designed for quick plumbing repairs, sealing hoses in your car/truck/boat, coating the ends of rope, sealing the hatch of a space shuttle as it re-enters earth's atmosphere, wrapping tool handles, emergency O-ring seals or to insulate electrical wiring. It resists fuels, acids, oils, solvents, salt water, road salt and UV rays .
Main Properties:
1. Thickness: 0.3mm, 0.5mm
2. Width: 10mm~50mm
3.Length/Roll: Normal package 3 ~ 20 meters
4. Standard color: Black, Red, Yellow, White, Blue, Green,
5. Operating temperature:-50°C~250°C
6. Thermal class:H
7.OEM service
8.Standard package:1 roll per box
Application:
1. Emergency Radiator Hose Repair
2. Insulate electrical wiring
3. Corrosion Protection
Technical Data:
Property | Test Results |
Operating temperature range | -50° C to 250° C |
Optimum working temperature | 180° C (10years) |
Cold Brittle Point | -50° C |
Elongation, Min. | 300% |
Bond Strength, Min. | 50g/mm |
Volume resistivity, Min. | 1×10∧13Ω·cm3 |
Water Absorbtion, Max. | 3% By Weight |
Dielectric Strength, Min. | 20KV/mm |
Directions
1.) Wrap Self-Fusing Silicone Tape around project by stretching and overlapping onto itself. Stretch at least double to ensure a good bond; for high pressure leaks stretch to maximum amount. The tighter Silicone Tape is wrapped, the quicker and stronger the bond.
2.) Continue wrapping Silicone Tape around project by overlapping 75% onto itself so that 2/3 the width is covered with the next wrap. The first and last wrap should completely overlap onto the previous wrap for a complete bond. Additional layers may be necessary, and the same process should be used over the previous layers. Silicone Tape works on either side.
3.) Repositioning Silicone Tape is only appropriate in the first few seconds after wrapping. Attempting to reposition Silicone Tape after 1 minute or longer is not recommended. Silicone Tape is not reusable; however, additional Silicone Tape can be applied over project at any time in the future.
