Audited Supplier
7*24h
Abrasion Resistance, Lubrication, High Temperature Resistance, Anti-Corrosion, Anti-Cold
Manual
New
RoHS, ISO, CE
24 Months
Semiautomatic
Desktop
Manual
Ei Inserts: 800~1500 Pieces
Windoo
Paper Carton with Wooden Cases
China
8479811000
Product Description
Semi-automatic automatic EI chip inserter shaker machine
Stacking machine For electronic transformer industry chip inserter, common specifications are:
El series inserting machine (low-frequency transformer, power supply transformer, meter transformer, etc.) EI single-sided stacking insert (argon arc welding products)E-piece stacking plug (electromagnet PFC, transformer, etc.), pneumatic single-push chip machine EE plug-in, common in 14.16.19 and other models El type 2/3-chip whole-stack plug-in EI three-phase transformer plug-in UI plug Chip machine
El series double insert manual/electric inserter
EI sheet insertion machine for assembling EI size sheets. The machine could be automatic or manual.
| Model | A | B | Machine size | Package size | Net weight |
| EI28 | 28 | 23 | 410×170×300mm | 410×170×300mm | 13kg/19kg |
| EI35 | 35 | 29.5 | 440×130×290mm | 550×240×330mm | 15kg/21kg |
| EI41 | 41 | 33 | 440×130×290mm | 550×240×330mm | 15kg/21kg |
| EI48 | 48 | 40 | 480×140×290mm | 550×240×330mm | 15kg/21kg |
| EI57 | 57 | 47.5 | 540×150×290mm | 630×260×380mm | 15kg/22kg |
| EI60 | 60 | 50 | 650×125×350mm | 680×155×380mm | 16kg/23kg |
| EI66 | 66 | 55 | 560×160×340mm | 630×260×380mm | 17kg/25kg |
| EI76 | 76 | 63.5 | 600×170×360mm | 840×330×440mm | 28kg/38kg |
| EI86 | 86 | 71 | 700×180×380mm | 840×260×400mm | 34kg/43kg |
| EI96 | 96 | 80 | 810×190×380mm | 840×260×400mm | 37kg/47kg |
| EI105 | 105 | 87.5 | 870×175×380mm | 900×205×410mm | 42kg/52kg |
| EI114 | 114 | 95 | 870×205×280mm | 920×280×410mm | 46kg/58kg |
| EI133 | 133 | 111 | 950×270×370mm | 1000×320×420mm | 47.5kg |
Features of EI type chip inserter:
• Ø This product is made of imported steel, with special treatment and precision machining, less wear, less failure, easy operation, long service life, and easy replacement of accessories.
• Ø The E piece is not pulled upside down, and the I piece is smooth (0.35 and 0.5 pieces are applicable). The accessories wear little and the work efficiency is high.
• Ø In addition to using E1 sheets of different thicknesses, the chip inserter does not need any adjustment and replacement of accessories;
• Ø E-type and I-type are inserted into the coil shaft at intervals one by one.
• Ø Regular EI-28 to EI-192.
• Ø Other specifications can be customized according to customer requirements, customers only need to provide silicon steel sheets and skeletons.
The operation method of EI type chip inserter:
1. Put the silicon steel sheet into the charging trough, put the burr down, the silicon steel sheet with too thick burr and the uneven sheet, turn the hand wheel manually, and take out the first I sheet pushed out from left to right.
2. Put the wound product skeleton balance on the debugged frame thimble.
