Audited Supplier
BM-8Y
Stretch Blow Molding Machine
PET
Stretch Blow
Non-Automatic
Computerized
CE, ISO9001:2008
Pet, PP Preforms
100ml-2000ml
400-800PCS/H
390*345mm
Adjustable
100kn
16kw
1460*580*1800mm
1460*580*1800mm
Semi Automatic Pet Bottle Blower with One Oven Two
BORUN
Wooden Case
one oven and two blowers
China
8477300000
Product Description
Semi Automatic Pet Bottle Blower with One Oven Two Blowers
BM-8Y semi automatic PET bottle blow molding machine is suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated bottle, mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc.
Equipment list:
*Spare parts List :
Seal cushion(10pcs);Lamps(5pcs);Fuse(3pcs);Switch(1pcs);breaker(1pcs);Silicon controlled (1pcs)
pressure adjust (1pc)
Features:
· Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
· The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
· The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
· The machine can be operated in the step-by-step mode and the semi-auto mode.
· The machine is small with low investment, easy and safe to operate.
Equipment list:
| NO. | NAME | MODEL | QTY |
| 1 | Semi-automatic PET bottle blow molding machine (one oven+two blowers) | BM-8Y | 1set |
| 2 | Blowing mold | 100ml-2L | 1set |
| 3 | HP Air Compressor | 1.2m3/min 30Kg | 1set |
| 4 | Air dryer | 2.0 m3/min 30Kg | 1set |
| 5 | Air filter | 2.0m3/min 30kg | 2sets |
| 6 | Water chiller | 3HP | 1pc |
Seal cushion(10pcs);Lamps(5pcs);Fuse(3pcs);Switch(1pcs);breaker(1pcs);Silicon controlled (1pcs)
pressure adjust (1pc)
Features:
· Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
· The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
· The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
· The machine can be operated in the step-by-step mode and the semi-auto mode.
· The machine is small with low investment, easy and safe to operate.
Technical Parameter of blow molding machine:
HP air compressor:
Air Filter:
Air dryer:
water chiller:
Contact Us:| Model | BM-8Y | |
| Container | Product material | PET |
| Volume | 0.1L-2L | |
| Theoretical output | 1200-1500PCS/H | |
| Max. product diameter | 180mm | |
| Max. product height | 300mm | |
| Molding | Max. mold plate Dimension(L x W) | 390x345mm |
| Die force | 100KN | |
| Die stroke | 270 | |
| Max. pulling stroke | 400 | |
| Blow pressure | 1.2-2.8Mpa | |
| Operation pressure | 0.8Mpa | |
| Machine size and weight | Machine size(LxWxH)(m) | 1.46x0.58x1.8m |
| Machine weight(KG) | 650KG | |
| Heater (L x W x H) | 1.35x0.55x1.15m | |
| Heater weight | 350Kg | |
| Power | 17.5kw | |
| Air compressor | Unit | 1.2M3/min 30KG |
| Volume | M3 | 1.2 |
| Pressure | Kg | 30 |
| Speed | r/min | 850 |
| Power | KW | 15 |
| Overall Dimension | mm | 2000*1100*1600 |
| Weight | kg | 620 |
Air Filter:
| Refining-Filter | Unit | 1.0M3/30Kg |
| Flow Capacity | M3/Min | 1 |
| Max. work pressure | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤50 |
| Cold Medium | mm | 650*250*250 |
| Weight | Kg | 15 |
Air dryer:
| Refrigeration Air Dryer | Unit | 2.0M3/min 3.0Mpa |
| Flow capacity | Nm3/min | 2.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤80 |
| Dew point | ºC | 23 |
| Ambient Temp. | ºC | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | mm | 1050×650×1100 |
| Weight | Kg | 120 |
water chiller:
| Model | 03WCI | |
| 4.4/38ºC Cooling capacity(Kcal/h) | 7188 | |
| Compressor | All-closed vorticity | |
| Compressor power (KW) | 2.5 | |
| Refrigerant | R22 | |
| Chilled water pump power(KW) | 0.75 | |
| 10ºC Max. flow rate of chilled water(L/min) | 55 | |
| Flow water inlet and outlet pipe | 1'' | |
| Condensing water rate L/min | ≥36 | |
| Chilled water inlet and outlet pipe | 1'' | |
| Exterior dimension | Length(mm) | 1000 |
| Width(mm) | 600 | |
| Height(mm) | 1180 | |
| Water tank capacity | L | 50 |
| Weight | Kg | 150 |
Mr. Xavier Guo
Tel: +86-512-58682331
Fax: +86-512-58682331
Mobile: +86-13405609100
borunmachinery.en.made-in-china.com
