Audited Supplier
2, Density: 95-100kgs/m3
3, The good UV-resistance
4, Competitve prices
Largely Used:
Mechanical seal, Marine and building industry, Container seal, Industrial control box industry;
Providing excellent air tight and waterproof properties, as well as good UV and ageing resistance and a high level of flexibility across a wide temperature spectrum, EPDM foam rubbers can be manufactured a numerous engineering, construction and industrial components such as:
Seals, gaskets, washers and belts for machinery
| Nos | property | Units | Tech requirments | Test Result | Test Method |
| 1 | tensile strength | Mpa | / | 0.16 | GB/T 6344-1996 |
| 2 | Elongation | % | / | 168 | GB/T 6344-1996 |
| 3 | Compression set | % | / | / | GB/T 6669-2001 |
| 4 | 23 Cx72hX25% | / | 16.2 | / | |
| 5 | 70 CX24hX25% | / | 56.3 | / | |
| 6 | Hot air aging (70Cx70h) after | / | / | GB/T3512-2001 | |
| 7 | Tensile Strength rate | % | / | 37.5 | GB/T 6344-1996 |
| 8 | Elongation rate of change | % | / | 13.1 | GB/T 6344-1996 |
| 9 | Low temperature bend (-40CX24H,180-degree bend sight) | / | No cracks | ASTM-D1050-2008 | |
| 10 | Heat shrinkage (90 degrees feeding x1H) after | % | / | 1.7 | GB/T 3512-2000 |
| 11 | Density | G/CM3 | / | 0.1 | GB/T 6343-1995 |
Q: Do you manufacture your own foam?
A: Yes, we do manufacture the foam using our own presses and molds. We have various sizes molds.
Q: Why your price labeled so cheap?
A: We manufacture the foam buns our self, and export directly, no extra fees added.
Q: What is your lead time?
A: Ninety percent of all our orders can be loaded in 15 days.
Q: How much can you fit on a 40 HQ container?
A: Approximately 66m³ for sheets, and 58m³ for rolls.
Q: What is your minimum order?
A: We do not have a minimum order. However, small qty will be waste for the shipping costs.
Q:What are acceptable forms of payment?
A: We accept wire transfers, TT payment, Paypal, Western Union, LC etc.
Q: What densities are available?
A: We stock 60kgs/m³ to 300kgs/m³ densities.
Q: What colors are available?
A: Black mainly; White; Grey; Mint Green; Blue; Yellow; Red; Lavender; Lime Green; and Natural.
Q:Does your material come with skins?
A: Generally no, although some materials are available with skins upon request.
Q: What can be used to cut your foam?
A: Most tools that can be used to cut wood can also be used to cut our foam. These include table saws, band-saws, table routing, water-jet, etc.
Both of them provide excellent protection and shock absorption for packaging applications.
For more info, please feel free to contact us any time, 7 x 24 service !
topsunfoam.en.made-in-china.com
