Audited Supplier
LRVP
Low Voltage Circuit Breakers
Auto
High Speed
Air
DIN-Rail Mounting
2
Circuit Protector
Under Voltage Protection
ISO9001-2000, CE
1p+N
230-300VAC
160-210VAC
230VAC
40-63A
Long Road
Box
36mm
China
Product Description
1. Application:
When the power supply line has overcurrent, overvoltage, or undervoltage, the protector can quickly and safely cut off the circuit under continuous high-voltage impact to avoid accidents caused by the abnormal voltage being sent to the terminal appliance. When the voltage returns to the normal value, the protector will Automatically connect the circuit within the specified time to ensure the normal operation of the terminal electrical appliances under unattended conditions.
2. Technical Parameter
3. Protecting parameter setup steps:
Push the SETUP button to enter the voltage setting mode, the screen will display as shown in Figure A. The voltage screen displays OU (overvoltage protection setting 230V~330V), and the current screen displays specific values. You can add and subtract values by pressing the up and down keys.
If you only need to set the overvoltage value, press the confirm button to complete the setting.
If you continue to set the undervoltage value, continue to press the setting button, the voltage screen will display UU (undervoltage protection setting 160V~210V), and the current screen will display the specific value. You can use the up and down keys to add or subtract values.
If you only need to set the over-voltage and under-voltage values, press the enter key to complete the setting.
If you set the over-voltage and under-voltage trip time, over-current protection, over-current trip time, fault recovery time, parameter settings, continue to press the SET button with the above operation, and set the required values in sequence (the character menu description is as follows)
TU voltage trip time setting 1 second ~ 300 seconds
OI overcurrent protection value setting 1A~40/63A
TI overcurrent trip time setting 1 second ~ 30 seconds
TUI failure recovery time setting 1 second ~ 300 seconds.
compangy profile
Longroad Electric Co.ltd founded in 2010, is located in the largest manufacturing base of low-voltage electric equipment of Liushi China, which is called "the Electric Device Metropolis of China". Longroad Electric specialized in the industrial electrical appliance, high-low voltage electrical equipment integrated with R&D, Manufacturing, International trade and service.
Longroad Electric Co,ltd regards quality of products as life,Longroad Electric Co.,ltd has been granted ISO9001 management system certifications. The comprehensive product line has more than 1000 models which have been approved by TUV, CE, CQC, SGS, ROHS,SASO. the products sells well to UK,Spain,Portugal,Singapore,Turkey,Russia, Korea,South Africa... more than 70 countries and regions.
Longroad Electric Co.ltd is always striving hard to provide the best services and competitve pricing to all customers.
Corporate Culture
Enterprise policy: market oriented; technology driven; quality for survival; brand for developmentBusiness philosophy: provide value for customers; seek development for employees; take responsibility for societyTalent view: the sea embraces all rivers and makes Jiaolong soar; the thousand boats compete to make the best of the worldQuality policy: people-oriented, pragmatic and innovative; pursuing quality and serving the marketEnterprise spirit: harmony, modesty, pragmatism and developmentCustomer service: think for customers; be responsible for customers; make customers satisfiedEnterprise goal: to build an electrical manufacturing enterprise
service Idea
"Integrity first, quality first" is the basic tenet of our company.Our quality policy is: installation specifications, timely maintenance. Abide by the contract, serve sincerely and meet the needs of customers. We know that product quality is the basic and key factor of enterprise competitiveness, and service is the extension of product quality and one of the important factors of enterprise competition. We are determined to treat our customers with "integrity":
1, All aspects of sincere service. That is, from the customer's electricity use report, engineering design, equipment procurement, installation and construction, equipment commissioning and acceptance, completion and power receiving to the test and detection during the future operation. We all provide all-round, whole process sincere service, try our best to meet the needs of customers.
2, High quality returns. We strictly follow the provisions and requirements of the contract terms and engineering design on the equipment, and provide qualified products that meet the requirements, so as to complete the engineering construction and installation tasks within the specified time limit with the installation technology level.
3, Active and stable aftercare service. We provide 24-hour emergency service after the project is powered on, that is, in case of abnormal operation of equipment or accident power failure, as long as the customer calls us, we will rush to the site immediately, remove the fault and resume power transmission.
When the power supply line has overcurrent, overvoltage, or undervoltage, the protector can quickly and safely cut off the circuit under continuous high-voltage impact to avoid accidents caused by the abnormal voltage being sent to the terminal appliance. When the voltage returns to the normal value, the protector will Automatically connect the circuit within the specified time to ensure the normal operation of the terminal electrical appliances under unattended conditions.
2. Technical Parameter
| Standard: | IEC 60947-6-1 |
| Pole line: | 1p + N |
| Rated voltage: | 230VAC |
| Rated current: | 20,25,32,40,50,63,80,100A |
| Overvoltage range: | 230~300VAC |
| Overvoltage recovery: | 275V |
| Undervoltage range: | 160~210VAC |
| Undervoltage recovery: | 175VAC |
| Over current revovery: | 40~63A |
| Restart time: | 30~60s |
| Energy consumption: | < 1W |
| Electromechanical: | > 100000 times |
| Width: | 36mm |
Push the SETUP button to enter the voltage setting mode, the screen will display as shown in Figure A. The voltage screen displays OU (overvoltage protection setting 230V~330V), and the current screen displays specific values. You can add and subtract values by pressing the up and down keys.
If you only need to set the overvoltage value, press the confirm button to complete the setting.
If you continue to set the undervoltage value, continue to press the setting button, the voltage screen will display UU (undervoltage protection setting 160V~210V), and the current screen will display the specific value. You can use the up and down keys to add or subtract values.
If you only need to set the over-voltage and under-voltage values, press the enter key to complete the setting.
If you set the over-voltage and under-voltage trip time, over-current protection, over-current trip time, fault recovery time, parameter settings, continue to press the SET button with the above operation, and set the required values in sequence (the character menu description is as follows)
TU voltage trip time setting 1 second ~ 300 seconds
OI overcurrent protection value setting 1A~40/63A
TI overcurrent trip time setting 1 second ~ 30 seconds
TUI failure recovery time setting 1 second ~ 300 seconds.
compangy profile
Longroad Electric Co.ltd founded in 2010, is located in the largest manufacturing base of low-voltage electric equipment of Liushi China, which is called "the Electric Device Metropolis of China". Longroad Electric specialized in the industrial electrical appliance, high-low voltage electrical equipment integrated with R&D, Manufacturing, International trade and service.
Longroad Electric Co,ltd regards quality of products as life,Longroad Electric Co.,ltd has been granted ISO9001 management system certifications. The comprehensive product line has more than 1000 models which have been approved by TUV, CE, CQC, SGS, ROHS,SASO. the products sells well to UK,Spain,Portugal,Singapore,Turkey,Russia, Korea,South Africa... more than 70 countries and regions.
Longroad Electric Co.ltd is always striving hard to provide the best services and competitve pricing to all customers.
Corporate Culture
Enterprise policy: market oriented; technology driven; quality for survival; brand for developmentBusiness philosophy: provide value for customers; seek development for employees; take responsibility for societyTalent view: the sea embraces all rivers and makes Jiaolong soar; the thousand boats compete to make the best of the worldQuality policy: people-oriented, pragmatic and innovative; pursuing quality and serving the marketEnterprise spirit: harmony, modesty, pragmatism and developmentCustomer service: think for customers; be responsible for customers; make customers satisfiedEnterprise goal: to build an electrical manufacturing enterprise
service Idea
"Integrity first, quality first" is the basic tenet of our company.Our quality policy is: installation specifications, timely maintenance. Abide by the contract, serve sincerely and meet the needs of customers. We know that product quality is the basic and key factor of enterprise competitiveness, and service is the extension of product quality and one of the important factors of enterprise competition. We are determined to treat our customers with "integrity":
1, All aspects of sincere service. That is, from the customer's electricity use report, engineering design, equipment procurement, installation and construction, equipment commissioning and acceptance, completion and power receiving to the test and detection during the future operation. We all provide all-round, whole process sincere service, try our best to meet the needs of customers.
2, High quality returns. We strictly follow the provisions and requirements of the contract terms and engineering design on the equipment, and provide qualified products that meet the requirements, so as to complete the engineering construction and installation tasks within the specified time limit with the installation technology level.
3, Active and stable aftercare service. We provide 24-hour emergency service after the project is powered on, that is, in case of abnormal operation of equipment or accident power failure, as long as the customer calls us, we will rush to the site immediately, remove the fault and resume power transmission.
