Audited Supplier
Load switch closing operation:
operating handle insert closing operation shaft hole (bottom right) clockwise rotation 180°, Institutions drive the contact rapidly do closing operation load switch.
Load switch break-brake operation:
operating handle counterclockwise rotation180 ° to complete the operation.
Load switch earthing operation:
operating handle insert ground operation shaft hole (top right) clockwise rotation 180 °, do the grounding switch institutions drive the contact rapidly. Break-brake operations of earthing switch Just insert the operating handle grounding operation shaft, counterclockwise rotation 180 °. Complete the operation.
The CT type spring operating mechanism assembled for assembling equipment with medal closed switch whose rated voltage is 12 kV.This series mechanism adopts the spiral spring to control the operation of loading switch.
The CT type spring operating mechanism assembled for XGN-12D is assembling equipment with medal closed switch whose rated voltage is 12 kV.This series mechanism adopts the spiral spring to control the operation of loading switch.
| Content | Unit | Parameter |
| Switch Contact pressure standard | N | 80-190 |
| Open tri-phase dissimilar | ms | ≤2 |
| Close tri-phase dissimilar | ms | ≤2 |
| Opening average speed | m/s | 3-6 |
| Closing average speed | m/s | 4-6 |
| Tri-phase bounce standard | m/s | ≤2 |
| Three-phase output angle | ° | 88° |
| Mechanical life | Times | 10000 |
| Operation strength | N | ≤110 |
