Audited Supplier
Oil Seal Cross Reference
TB-Type
The TB profile is a shaft seal composed of a single external metal cage with an internal rubber coating, a primary sealing lip with integrated spring and an additional anti-pollution sealing lip. The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime a suitable lubricant between the two sealing lips should be applied.
| Technical data | ||||
| Temperature | -40°C / +200°C Depending On Rubber Material | |||
| Pressure | Up to 0.05 MPa | |||
| Speed | up to 25 m/s | |||
| Medias | mineral and synthetic lubricants (CLP, HLP, APGL etc.) | |||
| Material | Rubber: NBR/FKM/HNBR Metal Insert: Carton Steel Spring: Carton Steel | |||
| Advantages | Good radial rigidity, particularly for large diameters Good stability when assembled, preventing the bounce-back effect Sealing for low and high viscosity fluids Modern primary sealing lip with low radial forces Effective protection against air side contaminants | |||
| Applications | Pumps, Electrical motors Transmission systems (e.g. gearboxes) Machinery industry (e.g. tool machines) Heavy Engineering Application | |||
To provide effective sealing, radial shaft seals must be installed properly. An experienced installer with suitable tools, working in a clean environment, is recommended to provide proper installation. To facilitate seal installation and to achieve initial lubrication, prior to installation, NextGen Tech recommends wiping the shaft and seal with the lubricant that is going to be retained. While the outside diameter of metal-cased seals can be lightly lubricated to ease installation, the outside diameter of rubber covered seals should always be lubricated.
Seals with an auxiliary, contacting lip can also be filled with grease between the sealing lip and auxiliary lip to reduce frictional moment. This does not apply to silicone rubber seals and seals with hydrodynamic features.
Sealing Mechanism of Oil Seal
1.Our price:
Our price is not the lowest one, but compared with the same quality level product,ours is the best one.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Kind: Oil Seals,O-ring, Rod/Piston seal, Gas seal, Guide elements, Large sized Seals Customized Seals.
Material: NBR/EPDM/FKM/Silicone/HNBR/PU
4. Shipping:
Quickly delivery, with several delivery ways, such as DHL/FEDEX/UPS/TNT express, Air and Ocean shipping way. We have several express accounts and can help you save cost.
5, About customized Service:
Drawings or samples, it is enough. We can produce colored rubber seal just based on your drawing or samples with kinds of colors. We also can give the professional advice based on your requirement.
