Audited Supplier
Au-1250, Au-1550, Au-2050
Multi-Use Grinding Machine
Stainless Steel Coil
Abrasive Belt
CNC
Automatic
Universal Cylindrical Grinder
High Precision
New
at Least 32 Heads
Hetang
Sea Worthy Packing
Up to Requirement
8460902000
Product Description
Sheet to Sheet Grinding Machine (Dry Type)
No. 4 Dry type Grinding Machine works similarly with No.4 Wet Type Grinding Machine, Except that there is no Oil Nozzles in the inlet & Outlet. So instead of the Oil Recycling System in the Wet Grinding Machine, Dust Collection System is installed in this machine to remove the dust caused by Dry Type Grinding.
Auto Loading & Unloading
Another Distinction is that Dry Type Grinding Machine is without HL Grinding Unit that is optional in wet type grinding line.
So In this case, only Dry type No.3 (Coarse Finishing, Abrasive Grain from G60 to G320) or No.4 (Fine Finishing, Most Popular, abrasive grain from G320 Or above) can be grinded by this machine.
Single Head Top Grinder
3 Head HL Grinder
Sheet to Sheet Grinding Machine (Dry Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Dust Collection Unit, Laminator as well as Electrical Control System.
Cleaning & Drying
Auto Laminator
Main Parameters:
Work Pieces: Stainless Steel Sheets or Plates of all grades
Useful thickness: 0.5~~3MM
Useful Length: 1,000~~2,500MM
Useful Width: <=1,219MM, or <=1,550MM
Transmitting Speed: 5~~18M/Min
Finishing Result: No.4 Dry Type
Type: Sheets to Sheets
Non-Standard Machine will be made upon Request.
Application:
Dry No.4 is coarser and a little rougher than Oil Type since no Oil Media is used in Grinding.
Typical Applications include: elevator, escalator, interior cladding, building facades, Home Appliance, Etc.
Further treatment is also done upon Dry Type No.4 Surface, PVD Color, Etched Pattern, Anti-Finger Print Processing, To name a few, are the most common one.
No. 4 Dry type Grinding Machine works similarly with No.4 Wet Type Grinding Machine, Except that there is no Oil Nozzles in the inlet & Outlet. So instead of the Oil Recycling System in the Wet Grinding Machine, Dust Collection System is installed in this machine to remove the dust caused by Dry Type Grinding.
Auto Loading & UnloadingAnother Distinction is that Dry Type Grinding Machine is without HL Grinding Unit that is optional in wet type grinding line.
So In this case, only Dry type No.3 (Coarse Finishing, Abrasive Grain from G60 to G320) or No.4 (Fine Finishing, Most Popular, abrasive grain from G320 Or above) can be grinded by this machine.
Single Head Top Grinder3 Head HL GrinderSheet to Sheet Grinding Machine (Dry Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Dust Collection Unit, Laminator as well as Electrical Control System.
Cleaning & DryingAuto LaminatorMain Parameters:
Work Pieces: Stainless Steel Sheets or Plates of all grades
Useful thickness: 0.5~~3MM
Useful Length: 1,000~~2,500MM
Useful Width: <=1,219MM, or <=1,550MM
Transmitting Speed: 5~~18M/Min
Finishing Result: No.4 Dry Type
Type: Sheets to Sheets
Non-Standard Machine will be made upon Request.
Application:
Dry No.4 is coarser and a little rougher than Oil Type since no Oil Media is used in Grinding.
Typical Applications include: elevator, escalator, interior cladding, building facades, Home Appliance, Etc.
Further treatment is also done upon Dry Type No.4 Surface, PVD Color, Etched Pattern, Anti-Finger Print Processing, To name a few, are the most common one.
