Audited Supplier
Introduction
♦ Charger and Discharger all in one.
♦ Apply to various acid and alkaline batteries' charging and discharging and testing the capacity.
♦ Working mode:
A. Charge mode: Four charging modes available:
Constant current-constant voltage-low constant current(IUIa);
Constant current, constant voltage(IUa);
Constant current, constant voltage, float charge mode(IUUa);
Initial charge mod(IIa)
B.Discharger mode:
Constant current, discharging to large-power loaded resistor, no pollution to grid
C. Circulation mode of charge and discharge:
Combine together charge and discharge process. Operater only need to set charge & discharger circle times and its time intervals.
battery discharger charger discharger battery discharge battery discharger high discharge rate battery charge and discharge battery tester
♦ Function of auto switch according to the battery voltage, no need operating.
♦ The parameters set by users would be recorded persistently.
♦ Fault protection function such as open circuit, battery reversal, overcurrent, overheating, overvoltage, lack of equal protection function and warning function.
♦ Phase sequence would not be required for power grid.
♦ Reset function. Make sure this system would back to normal situation.
♦ Parameters:
| Type(A/V) | Rated Input power(V) | Input current AC(A) | Charge and discharge current DC(A) | Charge voltage(V) | Power output(KW) | Battery packs(V) | Size | Weight(KG) |
| HCF5-65A/165V | Three phase 380V 50HZ | 28 | 0-65 | 0-165 | 10.8 | 24-120 | 900*595*1751 | 285 |
| HCF5-80A/165V | 35 | 0-80 | 0-165 | 13.2 | 24-120 | 330 | ||
| HCF5-100A/165V | 44 | 0-100 | 0-165 | 16.5 | 24-120 | 362 | ||
| HCF5-65A/210V | 34 | 0-65 | 0-210 | 13.7 | 24-144 | 330 | ||
| HCF5-80A/210V | 42 | 0-80 | 0-210 | 16.8 | 24-144 | 345 | ||
| HCF5-100A/210V | 53 | 0-100 | 0-210 | 21.0 | 24-144 | 390 |
As a factory with professional design ability, we have our own brand 'Shineng' and we have the abality to do customized commissioned works to meet special charging requirements and configuration!!
