Subject: 2 x GE LM2500
SAC-22MW -SIMPLE CYCLE
Country: POWER PLANT TBD
Thank you for considering SAINTWAH INC. for your rotating equipment services, and the supply of power generation equipment.
As one of the leading independent turbomachinery service providers, we have a record of accomplishment of power generation package delivery, commissioning, and life cycle maintenance services.
We are offering 2 x GE LM2500 SAC 22mw complete power plants and boilers, combined power of 44mw.
Both plants were overhauled and new hot sections, and only 600 hours on Unit 1 unit and 6000 hours on Unit 2 since new hot sections exchange and new TMF in 2022. Both units have new boilers that have never been fired.
The units are being decommissioned currently for export.
The units can be re- certified by the new owners and LTSA (Long Term Service Agreements) placed on either option.
Can be shipped immediately. Units are located in Malaysia.
If you have any questions, or require additional information, please feel free to contact us any time.
Please see a detailed scope, pricing and all-important information listed below.
Kind regards INTRODUCTION: GT1 -ESN: 481-415 HAS AROUND 600HRS SINCE HOT SECTION EXCHANGE AND MAJOR INSPECTION IN 2022. GT2- ESN: 481-758 HAS MAYBE 5000HRS SINCE LAST OVERHAUL AND HOT SECTION EXCHANGE AND MAJOR INSPECTION IN 2022. OUR COMPANY PROPOSES TO SUPPLY 2 X GE LM2500 SAC 22MW COMPLETE POWER PLANTS AND BOILERS, COMBINED POWER OF 44MW. BOTH PLANTS WERE OVERHAULED AND NEW HOT SECTIONS, AND ONLY 600 HOURS ON ONE UNIT AND 6000 HOURS ON THE SECOND UNIT. BOTH UNITS HAVE NEW BOILERS THAT HAVE NEVER BEEN FIRED. ALL CAN BE- RE- CERTIFIED UNDER A LTSA WITH GE WITH THE NEW OWNERS. LOW HOURS SINCE NEW HOT SECTION EXCHANGES AND NEW TMF IN 2022. GE SCOPE OF SUPPLY
Gas Turbine Type : LM2500PE
Power Output (ISO) : 22.34 KW @ Generator Terminal
Fuel Type : Liquid & Gas Fuels (dual firing)
Hours : 600 unit 1, and 6000 unit 2 - since last major inspection and hot section change
Generator : Brush Electric Machines LTD. BADX 7-167ER 11.0kV, 50 Hz,
3 Phase, 3000rpm, Air Cooled Type
Coupling : Power Turbine to Generator
L. O. System : GT L.O. Tank 600L, w/GT Driven Lube Pump
Generator L.O. Tank 800L, w/Gen. Shaft dr. Pump
Fuel System : Fuel Pump, Filter, Fuel Control Valve Fuel SO Valve Flow Meter
Water Wash : Cleaning Tank, Nozzle Spray Manifold
Hyd. Start : Hydraulic Lube Tank 150L, Charge Pump, Circ. Pump,
Hydraulic Oil Cooler, Electric Motor
Control System : Net Con 5000 Ver. 2.02-5
 Vibration System : Bentley Nevada
The GE LM2500 is a simple cycle, two-shaft engine consisting of a gas generator and a power turbine. Made in 1992. Generator is directly coupled to the Power Turbine Flange for 50 Hz, but easily switched to 60 Hz.
The LM2500 features variable geometry in the compressor, an annular combustor, air-cooled turbine blades and vanes, and a power turbine designed to provide high efficiency over a wide range of output power.
Modular construction simplifies field repair and replacement.
The LM2500 gas generator incorporates a 16-stage axial-flow compressor capable of reaching 18:1 pressure ratio. Inlet guide vanes and adjustable stator vanes on the first six compressor stages provide for efficient operation over the entire operating range. The LM2500 is manufactured with corrosion resistant coatings to extend hot section life.