Audited Supplier
Technical Parameters
RicardO ENGINE SPECIFICATION
Diesel Engine
Technical Data
| Technical data | |
| Genset Model | GF2/3R-40 |
| Prime Power | 40KW/50KVA |
| Rated Voltage | 400/230V |
| Frequency | 50/60Hz |
| Power Factor | 0.8(lagging) |
| The regulating rate of steady voltage | ≤±0.5% |
| The regulating rate of instantaneous voltage | ≤-15%/ +20% |
| The time of steady voltage | ≤1.5sec |
| The waving rate of voltage | ≤1.0% |
| The regulating rate of steady frequency | ≤3% |
| The regulating rate of instantaneous frequency | ≤±10% |
| The time of steady frequency | 3sec |
| Dimension (L×W×H) (mm) | 1800*720*1200 |
| Genset weight (kg) | 750 |
| Diesel Engine | |
| Brand | Ricardo |
| Model | K4100ZD |
| Number of Cylinders | 4 |
| Rotating Speed | 1500/1800RPM |
| Cycle | Four stroke |
| Type | waste gas turbine boost,direct spurting type |
| Bore×Stroke(mm) | 100*115 |
| Displacement(L) | 3.6 |
| Lubricating Capacity(L) | 7.45 |
| Speed Governor | Electrical |
| Cooling System | Water-cooled |
| Speed Stability (%) | ≤5% |
| Fuel Consumption at 100% Load | 208 g/kw.h |
| Starting Method | DC24V Electrical starting |
| Alternator | |
| Brand | XINYABO |
| Model | SLG224D |
| Number of Phase | 3 |
| Connecting Type | Three Phase and Four Lines |
| Number of Bearing | 1 |
| Grading Protection | IP23 |
| Altitude | ≤1000m |
| Exciter Type | Brushless (AVR automatic voltage regulating) |
| Insulation Class | H degree |
| The components of the genset | |
| (1) Ricardo Diesel Engine; (2)XINYABO Alternator; (3) Control Panel | |
| Control Panel | |
| The control panel is Quadruplication protection control panel, with the display of frequency table/water temperature/schedule/battery voltmeter. The genset with low oil pressure, high water temperature, over speed emergency, stop and other pre-protection. | |
Accessories
1 Direct injection type internal combustion engine (diesel); 2 AC synchronous generator; 3 - 50 DEG C for 40 C ambient radiator tank, belt driven cooling fan, fan safety shield; 4 Control panel 4 standard, the air output switch; 5 Unit of steel common base (including: unit vibration damping rubber pad); 6 Dry type air filter, fuel filter, oil filter, start the motor, and is equipped with a self charging generator; 7 Start the battery and battery to initiate a connection cable; 8 Random data: diesel engine and generator factory technical documents, generating set specification, testing report.
|
AMF Control Panel- ComAp AMF20 Or DSE7320
| Brand | Deepsea/ComAp |
| The control module gives digital readouts of: Generator voltage; Output frequency; Engine speed; Battery voltage; Engine hours run. The control module has indicators for failure information: Overspeed/underspeed, Emergency stop Low oil pressure; High water temperature Failure to start Battery charger failure Automatic shutdown occurs under: Low engine oil pressure; High engine water temperature; Overspeed/underspeed; Failure to start after three attempts. | |
General Technical Data
1. Frequency: 50 & 60Hz
2. Phase: 3 Phase 4 Wire & 1 Phase 2 Wire
3. Voltage: 120/207V,127/220V,220/380V, 230/400V, 240/415V, etc
4. Small volume, light weight, low noise, low fuel consumption, water cooling with water tank
5. Monitoring meters and control switches
6. Protection provided for short, over-current, over-speed, high water temperature and low oil pressure
Control Panel:
1. Automatic control panel (AMF), LCD display
2. Four protection systems
3. Emergency stop
Optional:
1. Trailer type
2. Soundproof / open type
3. ATS(automatic transfer switch)
Quality control oF XINYABO Power Genset
1.The genset canopy can be designed by customers demand free of charge.
2.Noise level can be designed by customer demand, standard noise level is 70-73DB at 7m. Super silent is 60-65DB at 7m.
3. Canopy color can be painted free of charge by customer demand. It is high quality paint.
4.All connection components and door lock are stainless steel.
5. We added oil filling inlet with lock
6. The oil box is separate made and then welded to the base frame, not by simple welding on the base frame. It is to make sure there is no oil leakage
7. The base frame is with forklift mouth which is easy to load and discharge
8. For Logo, we can paint customer's logo when the order is more than 5sets.
9. For technical specification or question, we can support you by our strong technical team
FAQ(Frequently Asked Question):
1.What is your warranty period?
Our payment terms is 1 year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.
2.Does your generator have global warranty?
Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
3.Can you accept OEM?
Yes, we can accept OEM.
4.What is your payment terms?
We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.
5.What is your delivery time?
Our normal delivery time is 2 to 5 weeks. But if your order is some special engine and alternator, then the delivery time is longer.
