Audited Supplier
HM-SS5549
Automobile
Instant Adhesive
Solid-State
Room Curing
None
Neutral Sealant
None
None
Howell
70ml/ Box
N/M
China
3506100010
Product Description
| Automobile Neutral Silicone HM-SS5549 | ||
| 1. Before curing | ||
| Items | Typical Value | Test Std. |
| Sagging (mm) | 0 | GB/T13477.5-2003 |
| Surface drying time (h) | ≤2 | GB/T13477.5-2003 |
| Depth curing rate | 2 mm/day | |
| Complete curing time (humidity 50±5%, temperature 23±2ºC) | 14-21 days | |
| 2. After curing for 21 days under conditions of humidity 50±5%, temperature 23±2ºC | ||
| Hardness (Shore A | 35 | GB/T531 |
| Tensile modulus at 25% elongation (MPa) | 0.16 | GB/T13477.8-2003 |
| Tensile modulus at 50% elongation (MPa) | 0.36 | GB/T13477.8-2003 |
| Tensile modulus at 100% elongation (MPa) | No break | |
| Ultimate tensile modulus (MPa) | 1.2 | GB/T 13477.8-2003 |
| Ultimate elongation% | 400 | GB/T13477.8-2003 |
| Grade of sealant | 25HM | ISO 11600 or JC/T881-884-2001 |
| Notes: *a, Conditioning, specimen is conditioned under (23±2) ºC, (50±5)% relative humidity if not specified; *b, Testing Condition, specimen is tested at (23±2) ºC, (50±5)% relative humidity if not specified;;*c, Substrate | ||
| *d, Others need to be specified. | ||
| The above data is intended to provide guidance for use and should not be used to write product specifications. | ||
PRODUCT DESCRIPTION
HM-SS5549 silicone weather-resistant adhesive for construction is a kind of one-component, neutral curing, low modulus, high elasticity silicone rubber; it has good elasticity and displacement deformation ability, and has good adhesion to various powder coating metals. The thixotropy of the product prevents it from sagging when it is applied in building joints, so it is especially suitable for the design of non-structural bonding, weather resistance, and waterproof sealing of various curtain walls; at the same time, it can be used in a wide range of climate temperatures. It can be used, and it has good adhesion and compatibility to the surface of most substrates without primer. After curing, it is anti-aging, anti-ultraviolet radiation and extreme high and low temperature (-50-150°C) changes; it has Low modulus performance, can bear the expansion and displacement capacity of the interface ± 25%, can be widely used in bonding and sealing.
FEATURES
1. Anti-aging
2. Anti-ultraviolet radiation
3. Extreme high and low temperature (-50-150°C) changes
4. Low modulus performance
APPLICATION
1. Application of glass curtain wall, aluminum-plastic panel curtain wall, door and window sealing and caulking.
2. Non-structural adhesive assembly application of various curtain walls.
3. ation of sealing and caulking between various metal and aluminum alloy doors, windows and walls.
4.Glass, coated glass, tiles and masonry, concrete, etc.
5.Wood that does not seep oil.
4.Glass, coated glass, tiles and masonry, concrete, etc.
5.Wood that does not seep oil.
RESTRICTIONS
APPLICATION TEMPERATURE: +5ºC to +45ºC
1. Cannot be used for structural assembly.
2. Cannot be used on the surface that will seep plasticizer or solvent, which may cause permanent damage to the sealant.
3. It is not recommended to be used in a completely sealed space, because it will not be fully cured due to lack of of water vapor.
4. Not recommended for long-term immersion in water.
5. It is not recommended to be used on structural surfaces that will directly contact food.
6. It is not recommended to be used on medical.
5. It is not recommended to be used on structural surfaces that will directly contact food.
6. It is not recommended to be used on medical.
Store the original sealed adhesive in a dry place with a temperature not exceeding 27 degrees.
The storage period is 12 months from the date of production.
The storage period is 12 months from the date of production.
COLOR AND PACKAGE
Silver Black
Different colours are available.
70ml aluminum tube paper card plastic seal, 50m1 syringe with TDS12 / small box, 12 boxes/box
SAFETY
Keep out of reach of children. Before operation, please carefully read the specifications of products and material, and instructions on
the package of container.
For more information about safety, please
Nanjing Howell New Materials Technology Co., Ltd.
Room 501, Unit 7, Xingzhihui, Xinghuo Rd 19th, Jiangbei New District, Nanjing, (211899), Jiangsu, China.
American Warehouse:Add: 1006 CROCKER RD, DOOR E5, WESTLAKE, OH 44145
