Audited Supplier
Styrene-acrylic Copolymer Emulsion BAW-90R
(Similar to Joncryl 90 )
Description:
Styrene-acrylic Copolymer Emulsion BAW-90R is a non-film forming-Rigid Styrene - Acrylic copolymer emulsion, is specifically designed for water-varnished and printing ink. Use this product in the preparation of the varnish has a faster drying speed and high gloss, outstanding performance in the anti-water-resistant and adhesive resistance, it also has a good compatibility with common acrylic polymer in the market. Since this product can't film-forming by itself, it must be used with the appropriate coalescing agents or with the small particle size film-acrylic acid emulsion, such as our products BAW-27R,BAW-34R,BAW-48R,BAW-148R,BAW-50R and so on. In addition, the product has a good wet ability in the letterpress and gravure.
Features & Benefits:
1. Excellent glossy, if formula proper, it can make a high glossy and superior transparency products.
2. Extraordinary wet ability for the pigment
3. Fast drying speed
4. Outstanding water and adhesive resistance, after the printing surface become dry, glossy still preserved.
5. Good brush ability and abrasion resistance
6. Has a good compatibility with other water based resin prevailing in the market
7. Low odor
Application:
1. water-based overprint varnishes
2. Water-based gravure and letterpress ink
3. Water-based plastics ink
4. All kind of water-based varnish and high-grade water-based ink.
Specification:
| Appearance | Translucent milky white |
| solid content | 45±1 |
Viscosity at 25ºC,cps(Brookfield, LVT No.4,60 RPM ) | 1000-1500 |
| PH | 8.0-9.0 |
| Density G/L | 1.02-1.05 |
| Um | 0.20-0.30 |
| Tg | 110 |
Packing: 200 kgs net per plastic drums.
Store: Keep containers closed,avoid exposure to heat source or freezing,use it in six month if possible, the store temperature should between 10 and 35ºC.
Certificate:
