Audited Supplier
SMC300
Yes
Two Years
Provide OEM and ODM
Middle
Customized
Motion Control
Metal
CE
24V+-10%,3A
18V
2000m
IP20
Level 2
Natural Cooling
10MB
512kb
1.7s
SINEE
Wooding
China
Product Description
CNC motion control card 3 axis cnc controller for cnc
| Product Category | Series | ||||
| SMC:Motion Controller | 300:300 Series | ||||
| Axes Quantity | Command type | ||||
| 032:32 Axes | E:EtherCAT | ||||
| Customization | |||||
| Serial | Type | Interface ID | Definition | Illustrate |
| 1 | Silk screen | / | Logo | / |
| 2 | Indicator light | PWR | Power status | / |
| RUN | Run/stop state | / | ||
| ERR | Network Error | E bus, C bus error indication | ||
| SYS | system status | Steady red light: system error; | ||
| Blinking green light: wink; | ||||
| Steady green light: the system is normal | ||||
| 3 | LED indication | / | 16 input | / |
| 12 output | ||||
| 4 | DIP switch | RUN | control system operation | / |
| STOP | control system stop | |||
| 5 | I/O terminal | / | 16 input | For detailed definitions, please refer to the manual |
| 12 output | ||||
| 6 | Expand right | / | Right expansion module interface | For detailed definitions, please refer to the manual |
| 7 | RS485 interface | 485+ | 485 communication+ | / |
| 485- | 485 communication- | |||
| GND | 485 communication place | |||
| 8 | Power interface | +24V | DC 24V input | / |
| 0V | ||||
| PG | PG | |||
| 9 | Ethernet port 2 | EtherCAT | EtherCAT communication | / |
| 10 | Ethernet port 1 | EtherNET | Ethernet communication | Fixed IP: 192.168.1.8 |
| 11 | USB | Type-C | For firmware upgrade | / |
| 12 | Left extension accessory | LBD-A | Left expansion card | For detailed definitions, please refer to the manual |
| LBD-B |
| Items | Specification Description |
| Input Power Specifications | 24V ± 10%,3A |
| Under voltage level | 18V |
| Power-down save time | 1.7s |
| Operating temperature | -10 ~ +55ºC |
| Storage temperature | -25 ~ 80ºC |
| Relative humidity | 5%~95% (no condensation) |
| Altitude | 2000m |
| Pollution level | level 2 |
| Degree of protection | IP20 |
| Cooling method | Natural cooling |
| Installation method | Rail installation 35mm |
| Program data capacity | 10MB |
| Power-down storage capacity | 512KB |
| Ethernet | 1.Modbus TCP protocol |
| 2.10/100M Transmission rate | |
| 3. User program download and debugging (only supports IPv4) | |
| EtherCAT | Synchronization cycle 4ms/32 axes |
| RS485 serial communication | 1. Serial port number: COM1 |
| 2. Baud rate: 4800-115200 | |
| Expansion method | Left and right local expansion |
| Programmatically | IEC 61131-3 Programming language(LD,FBD,IL,ST,SFC,CFC) |
| USB | Type_Cinterface, firmware upgrade |
