Audited Supplier
Digital post-press enhancement
L7200 x W2300 x H1900mm
Parameters of printing control system
1.Printing software:variable data software or graphic output software.
2.The secondary development software:provides the interface to support the secondary development, and optionally supports the connection detection.
3.Dot control:software supports CMYK two bit dot Rip.
4.It supports nozzle temperature, voltage adjustment, without changing the driving waveform. Supports waveform encryption.
5.Color curve editing:can support color curve calibration.
6.The printing module is equipped with 4 color printing units, and each color unit is composed of 3 nozzle modules.
7.1 set of main control box (including 9u main box (communication control board, ink gas path control board), ink supply box, gas path box, etc.)
8.High precision printing mode 50m/ min (600x1200dpi, two dots, base on material / resolution / environment / platform and other factors)
9.Interface type:USB3.0 and optical fiber data transmission, additional LAN or CAN interface can be provided for equipment connection.
10.All connectors can be plugged in and out independently.
11.The computer is equipped with high-performance i7 processor, 8g memory, 2TB hard disk, 2G independent graphics card, two USB3.0 interfaces, win7.64bit
Other technical parameters
| Ink type | UV/water base ink |
| The ink color | yellow, magenta, blue, black or can be expanded to orange, purple, white or spot color. |
| Curing type | drying module or quick drying ink |
| Power requirements | AC220V 50 / 60Hz. |
| Air supply requirements | 6-8 PA, clean or dry. |
| Printing platform requirements | single-fed or roll-fed. |
| Materials weight | 60-250g/m2 |
| Materials type | ordinary paper, offset paper,adhesive labels. |
