Audited Supplier
Customized high quality single screw barrel for injection molding machine factory price
High speed single screw plastic extruder, strong torque, large thrust, high strength alloy steel gear and shaft superior performance, easy to operate, friendly control interface, high speed extrusion, high yield and high quality products, is a popular plastic processing machinery.
Technical Information for single screw barrel | |||
Main Base materials | 1.38CrMoAlA (SACM645) | Main Alloy Materials | 1. Ni-based alloy/Deloro alloy |
2. SKD-61 (Special Tool Steel) | 2. Tungsten carbide/Wolfram carbide | ||
3. 42CrMo (Ultrahigh StrengthSteel) | 3. NiCo-based alloy | ||
4. DC53 (Cold WorkDie Steel) | 4. Fe-based alloy | ||
5. W6Mo5Cr4V2 (High-SpeedToolSteel) | 5. Co-based alloy | ||
Processing Technics | 1. Heat treatment | Technical parameters | Nitriding layer depth:0.5-0.8mm |
2. Quenching | Nitrided hardness:900-1000HV | ||
3. Nitriding treatment | Bimetallic layer depth:3 mm | ||
4. Bimetallic alloy welding for screw | Bimetallic hardness:57~69HRC | ||
5. Bimetallic alloy centrifugal casting for barrel | Hard-chrome plating hardness after nitriding:≥950HV | ||
6. Hard-chrome electroplating | Chrome-plating layer depth:0.03-0.09mm | ||
7.Linearity of screw:0.015mm | Surface roughness:Ra 0.4 | ||
Specification:
1) 38CrMoAlA(JIS SACM645)
2) 42CrMo(JIS SCM440)
3) 9Cr18Mov
4) CW6Mo5Cr4V2
Characteristic
High quality alloy-steel
Heat-treatment
Nitriding treatment
Electroplated hard-chrome finish
Spray bimetallic coating
Depth of nitriding layer: 0.5~0.8mm
Nitriding hardness: 900~1000Hv
Nitriding brittleness: less than one grade
Surface roughness: Ra0.4
Straightness of screw: 0.015mm
Surface hardness of chromium plating after nitriding: greater than 950Hv
Chromium plating thickness: 0.025~0.085mm
Application
PVC wood plastic, PE wood plastic, ultra-high molecular plate, free brick plate, 1:2 above high calcium buckle plate, high calcium pipe, high calcium profile, soft PVC sheet, PVC foam board and other ordinary plastics, PP, PE, ABS, PVC, raw material granulation, production of pipe, profile, sheet and other products.
Amount of injection (g) | screw diameter x length(mm) | barrel diameter x length(mm) | Amount of injection(g) | screw diameter x length(mm) | barrel diameter x length(mm) |
30-90 | Φ30x900 | Φ85x860 | 800-1250 | Φ75x1825 | Φ170x1725 |
60-125 | Φ35x910 | Φ85x860 | 1000-1500 | Φ80x2000 | Φ180x1805 |
100-150 | Φ38x935 | Φ95x900 | 1250-2000 | Φ85x2300 | Φ190x1900 |
125-160 | Φ40x980 | Φ95x910 | 2000-3000 | Φ90x2700 | Φ210x2000 |
125-300 | Φ42x1030 | Φ105x8880 | 2500-5000 | Φ100x2600 | Φ230x2405 |
250-400 | Φ45x1210 | Φ115x1165 | 3000-6000 | Φ110x2600 | Φ256x2590 |
300-500 | Φ50x1300 | Φ125x1260 | 4000-10000 | Φ120x2800 | Φ256x2800 |
450-600 | Φ55x1335 | Φ130x1320 | 6000-8000 | Φ130x3010 | Φ256x2970 |
500-700 | Φ56x1350 | Φ130x1350 | 8000-10000 | Φ145x3010 | Φ256x3200 |
500-700 | Φ60x1380 | Φ140x1350 | 10000-15000 | Φ160x3500 | Φ270x3200 |
1)Packing: Wrapped up by film in wooden cases
2)Port Departure: Ningbo Port
3)Delivery time: 25 working days upon receipt of 30% deposit(days based on your quantity)
We use strong plywood or wooden case for all our products.
Q1. Are you a trading company or a manufacturer?
We are a BSCI&ISO-9001 certificated manufacturer.
Q2. Can I place the customized order for different sizes, colors, materials,packings….?
Yes, all the customized orders are welcomed.
Q3. Could I get a QC report before delivery?
Yes, the specific QC reports will be sent to you before delivery.
Q4. Can I get a lower price if I place a larger order?
Yes, the price will be modified according to your order quantities.
