Audited Supplier
T-FMTNHH-1
Automotive Wiring, Electrical Insulation, HVAC System, Pipe Insulation
as Pic
Mica
Customized
Customized
Insulation Tape
Inorganic Insulation
Inorganic Insulation Material
ISO9001
OEM
Carton
0.12mm, 0.14mm
China
Product Description
This product is mainly used for fire-resistance layerand temperature enhanced layer in the fire-resistant andhigh temperature-resistant cable.
Note:Special specification is available according to the requirements.
a. The fire-resistance cable that wrapped with the mica tape produced could easily pass the burning test of GB19216-2003/IEC 60331-21:1999<Tests for electric or optical fibre cables under fire conditions>.
b. It is the best quality fire proof and fire-resistant material.
c. Cable with the synthetic mica tape single layer wrapping can continue the normal circuit operating with 3 hours at 1000ºC.
d. Cable with the fire-resistant mica tape will not get fire because of the short circuit resulting from the heat of over load of the cable in 3 hours.
e. Cable with fire-resistant mica tape will reduce and prevent from producing and releasing poisonous smoke and gas when burning.
f. It has good fire,acid,alkali,corona and irradiation-resistant characteristic.
g. It has completely non-flammable and heat-resistant performance.
It should be stored in the dry and clean warehouse and the shelf life is 6 months after the manufacturing date.
| Type | Designation | Nominal thickness mm(±0 . 02) | Scope of application Class A or B | |
| T-FMTNHJ-1 | Single-side PE film enhanced phlogopite mica tape | 0.12 | B,A | |
| T-FMTNHJ-2 | Double sides PE film enhanced phlogopite mica tape | 0.14 | B,A | |
| T-FMTNHJ | Single-side fiberglass Enhanced phlogopite mica tape | 0.12 | B,A | |
| T-FMTNHJ-3 | Fiberglass and PE film enhanced phlogopite mica tape | 0.14 | B,A | |
| T-FMTNHJ-S | Double sides fiberglass enhanced phlogopite mica tape | 0.14 | B,A | |
| T-FMTNHD | Single-side fiberglass enhanced calcined mica tape | 0.12 | B,A | |
| T-FMTNHD-3 | Fiberglass and PE fim enhanced calcined mica tape | 0.14 | B,A | |
| T-FMTNHD-S | Double sides fiberglass enhanced calcined mica tape | 0.14 | B,A | |
| T-FMTNHH-1 | Single-side PE film enhanced synthetic mica tape | 0.12 | A | |
| T-FMTNHH-2 | Double sides PE film enhanced synthetic mica tape | 0.14 | A | |
| T-FMTNHH | Single-side fiberglass enhanced synthetic mica tape | 0.12 | A | |
| T-FMTNHH-3 | Fiberglass and PE film enhanced synthetic mica tape | 0.14 | A | |
| T-FMTNHH-S | Double sides fiberglass enhanced synthetic mica tape | 0.14 | A | |
| N o | I t em | V a l u e | |||||
| mica content % | ≥55 | ||||||
| 2 | organic silica-gel content % | ≤17 | |||||
| 3 | volatile content % | ≤1.0 | |||||
| 4 | tensile strength N/cm | ≥80 | |||||
| 5 | volume resistance Ω ·m | ≥1.0×10^10 | |||||
| 6 | dielectric strength MV/m | ≥10 | |||||
| 7 | insulation resistance | MΩ | phlogopite mica tape calcined mica tape | ≥1.0 | |||
| synthetic mica tape | ≥0.4 | ||||||
| 8 | fire-resistan performance | phlogopite mica tape calcined mica tape | Class B(750-800ºC),90min voltage test 1KV | ||||
| synthetic mica tape | Class A(950-1000ºC),90min voltage test 1KV | ||||||
a. The fire-resistance cable that wrapped with the mica tape produced could easily pass the burning test of GB19216-2003/IEC 60331-21:1999<Tests for electric or optical fibre cables under fire conditions>.
b. It is the best quality fire proof and fire-resistant material.
c. Cable with the synthetic mica tape single layer wrapping can continue the normal circuit operating with 3 hours at 1000ºC.
d. Cable with the fire-resistant mica tape will not get fire because of the short circuit resulting from the heat of over load of the cable in 3 hours.
e. Cable with fire-resistant mica tape will reduce and prevent from producing and releasing poisonous smoke and gas when burning.
f. It has good fire,acid,alkali,corona and irradiation-resistant characteristic.
g. It has completely non-flammable and heat-resistant performance.
It should be stored in the dry and clean warehouse and the shelf life is 6 months after the manufacturing date.
