Audited Supplier
Introduction
SKC600 200L bioreactor is developed for cell culture. It uses a rocker platform to place single-use suspension cell culture bags or single-use fabric carrier culture bags(produced by ourselves). Also It can control the rocking speed, tilt angle, gas flow, temperature, pH, DO, concentration of CO2 and 02 and weight. It is used for GMP production line, and also prepare suspended seed cells or adherent seed cells for large-scale stainless steel/single-use bioreactors more than 200L. One 200L ortwo 100L cell culture bags optional.
Specification
| Control system | Siemens PLC, 15-inch color touch screen, Ethernet interface, USB interface |
| Temperature control | Heating plate, PID automatic control, accuracy: ±0.2°C; Temperature control range: 5-40°C above |
| Rocker speed | l-25rpm |
| Tilt angle | 1-10° |
| Gas* | 3 thermal mass flow controllers (Air/O2/CO2), 1 thermal mass flow meter with 3 gas mixer optional |
| Exhaust* | Exhaust condenser, exhaust filter heater optional |
| Exhaust analysis | 02 (0-50%), CO2 (0-15%) |
| Pressure detection | Range: -l00mbar--l00mbar; Stop air intake when it is exceeded. |
| pH | Single-use pH probe, control range: 6-8, accuracy:±0.05pH; PID control; cascaded by MFC, peristaltic pump, etc. |
| DO | Single-use DO probe, control range: 0-100%, accuracy:±3%; PID control; cascaded by rocker speed, MFC, etc. |
| Pumps* | 4 fixed-speed peristaltic pumps, 25RPM or 100RPM variable speed optional |
| Load cell | Load: 0-200kg, accuracy: ± (0.050 + 1% loading sampling) kg;cascaded by pumps optional |
| Utilities | Air/O2/CO2, pressure: 15-20PSIG |
| Signal interface* | Optional |
| Power supply | AC220V, 50/60HZ, 10A |
Q:Are you factory or trading company?
A:We are a factory.
Q:What's the MQQ?
A:1 unit.
Q:Do you offer overseas service?
A:Yes,We are dispatch engineer to overseas.
Q:Can we visiting your factory?
A:Yes,warmly welcome.Our factory location is Shanghai, China.If want to visit our company , you can fly to Shanghai Pudong Airport .
Q:How about your delivery time?
A:1 week to 3 months.Depend on the size and quantity.
