Audited Supplier
ST52 seamless steel honing tube for hydraulic cylinder:
ST52/16Mn/E355 or A106B/20#/C20 material. ID size from 40-400, H8, BKS condition.
We also have cold drawn tubes/ pre honed tubes/ ready to honed tubes./skived tubes
Material & Chemical Composition:
DIN2391 standard ST52, EN10305 standard E355, 16Mn, ASTM A106B, C20/20#, CK45
Material | C | Si | Mn | S(≤) | P(≤) | Cr | Ni | Mo | other |
A106B / C20# | 0.17-0.23 | 0.17-0.37 | 0.35-0.65 | 0.035 | 0.035 | ≤0.25 | ≤0.30 |
| Cu≤0.25 |
CK45# | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 | 0.035 | 0.035 | ≤0.25 | ≤0.30 |
| Cu≤0.25 |
Q345B | ≤0.20 | ≤0.55 | 1.00-1.60 | 0.040 | 0.040 | V:0.02-0.15 | Nb:0.015-0.06 | Ti:0.02-0.20 | Alt≥0.015 |
ST52 E355 16Mn | ≤0.20 | ≤0.55 | 1.00-1.60 | 0.045 | 0.045 | V:0.02-0.15 | Nb:0.015-0.06 | Ti:0.02-0.20 | 16Mn |
25Mn | 0.22-0.30 | 0.17-0.37 | 0.70-1.00 | 0.035 | 0.035 | ≤0.25 | ≤0.25 |
|
|
27SiMn | 0.24-0.32 | 1.10-1.40 | 1.10-1.40 | 0.030 | 0.030 |
|
|
|
|
42SiMn | 0.39-0.45 | 1.10-1.40 | 1.10-1.40 | 0.030 | 0.030 |
|
|
|
|
42CrMo | 0.38-0.45 | 0.17-0.37 | 0.50-0.80 | 0.025 | 0.025 | 0.90-1.20 |
| 0.15-0.25 |
|
Accuracy :
Working method | Cylinder ID (mm) | Length (m) | Straightness (mm/m) | Tolerance on ID | Tolerance on WT | Roughness (μm) |
Cold drawn | 40-320 | ≤12M | 0.2-0.5 | / | ±5% | 0.8-1.6 |
Cold rolling | 30-100 | ≥12M | 0.2-0.5 | / | ±5% | 0.8-1.2 |
cold drawn-honed | 40-500 | 8M | 0.2-0.3 | H8-H9 | ±5% | 0.2-0.8 |
Cold drawn-skived | 40-400 | 9M | 0.2-0.3 | H8-H9 | ±5% | ≤0.4 |
Hole boring-honed | 320-400 | 8M | 0.2-0.3 | H7-H9 | ±8% | ≤0.8 |
Hole boring-skived | 320-400 | 9M | 0.2-0.3 | H8-H9 | ±8% | ≤0.4 |
Mechanical property:
Final Supply Condition | Cold drawn finished (BK) | Cold drawn and stress-relieved (BKS / SR) | Hardness HB | |||
Parameters | Tensile Strength (MPA) | Elongation δ% | Tensile Strength (MPA) | Yield Strength (MPA) | Elongation δ% | |
C20 / 20#/A106B | ≥550 | ≥8 | ≥520 | ≥470 | ≥12 | 175 |
45#(CK45) | ≥650 | ≥5 | ≥600 | ≥520 | ≥12 | 207 |
16Mn(ST52,E355) | ≥640 | ≥5 | ≥600 | ≥520 | ≥15 | 190 |
25Mn | ≥640 | ≥5 | ≥600 | ≥510 | ≥15 | 195 |
27SiMn | ≥840 | ≥5 | ≥800 | ≥720 | ≥10 | 230 |
