Audited Supplier
| Euro Standard: (Stackable & Unstack able) | ||||
| Volume | 15L | 20L | 30L | 50L |
| Dimension (Diameter*Height) | 395*253mm | 395*287mm | 408*365mm | 408*532mm |
| N.W | 7.5KG | 8.5KG | 9.8KG | 11.8KG |
| Customized logo | yes | yes | yes | yes |
| US Standard: (Stackable & Unstack able) | |||
| Volume | 1/6(5.16 gallon ) | 1/4(7.75 gallon) | 1/2(15.5 gallon ) |
| Dimension(Diameter* Height) | 235*590mm | 278*590mm | 408*590mm |
| N.W | 5.7KG | 8KG | 12.6KG |
| Customized logo | yes | yes | yes |
| DIN Standard: (Stackable & Unstack able) | |||||
| Volume | 10L | 15L | 20L | 30L | 50L |
| Dimension(Diameter*Height) | 363*215mm | 363*265mm | 363*305mm | 381*400mm | 381*600mm |
| N.W | 5KG | 7KG | 8KG | 9.5KG | 11.8KG |
| Customized logo | yes | yes | yes | yes | yes |
| Mini Standard: (Stackable & Unstack able) | |||||
| Volume | 2L | 4L | 5L | 10L | 15L |
| Dimension(Diameter* Height) | 135*180mm | 168*258mm | 235*240mm 168*294mm | 235*356mm | 235*477mm |
| N.W | 1.5KG | 2KG | 4KG | 4.8KG | 5.5G |
| Customized logo | yes | yes | yes | yes | yes |
Product Name | European standard 30 litres beer keg stainless steel euro 30l beer keg |
Payment method | 30% deposit, balance paid by T/T before shipment |
Size: | 395mm*365mm |
Thickness of Body | 1.5mm/1.8mm |
Thickness of Body | 1.5mm |
OEM,ODM | Available |
Production Process
1 Deep drawing: Special drawing presses are used to produce highly accurate, precision-dimensioned, smooth-surfaced deep-drawn parts from circular blanks.
2 Forming: Technical crimping of beads in the coldformed keg halves. Cutting the keg halves. Making the bunghole
in to half of the keg.
3 Welding in the necks: The necks are automatically welded in the top keg halves using a special method.
4 Embossing and labeling: Customer-specific data are embossed or stamped on the kegs in a special press. Such data include the customer's name, logo,
type approvals and serial numbers
5 From bending, welding, rolling: The chime strips are rolled into rounds, tensed and welded fully automatically to
produce the chime rings. These are rolled in a hydraulic forming press equipped with special tools.
6 Stamping and forming: The hand and drain holes are stamped and punched fully automatically by precision machines.
All parts are mechanically deburred safe handling.
7 Welding the chimes on the keg halves: The chimes are welded on the top and bottom keg halves by special welding
methods.
8 Circumferential welding of the two keg halves: The keg halves are welded together to obtain the complete keg on fully
automatic circumferential welding machines. Hygienic, smooth, narrow, flat weld seams and perfect weld root,
especially on the side in contact with the product.
9 Pickling, pre-rinsing, passivation, rinsing: The kegs are pickled, rinsed and passivated inside and out, to ensure a
grease-free, hygienically sealed surface.
Materia
SUS304/2B, the thickness is using 1.2mm, 1.5mm, 18mm, 2.0mm
The pressure test
The keg is pressed with 0.5MPa and kept 3 minutes.
