Audited Supplier
Flotation machine can be used for many ore beneficiation . It is subject to coarse separation, swept separation, fine separation and flotation, so the useful ore are reclaimed.
Application of Flotation Machine:
Application: Metal ore such as gold, silver, copper, Lead (Pb), Zinc (Zn), Tin, Nickel (Ni) and so on, non-metal mineral, raw body and materials of chemical industry.
The flotation machine is mainly used for sorting non-ferrous metals such as copper, zinc, lead nickel and gold, and can also be used for rough selection and selection of ferrous and non-metal. The motor is driven by the motors V-belt drive to rotate the impeller, which generates centrifugal force to form a negative pressure On the one hand, it absorbs sufficient air to mix with the slurry. On the one hand, it mixes the slurry with the drug, and refines the foam to make the mineral bond foam Mineralized foam is formed on the slurry surface. Adjust the height of the shutter and control the liquid level so that the useful foam is scraped off by the scraper.
Flotation Machine Features
1.Simple structure, strong agitation ability, and low energy consumption.
2.The impeller is equipped with holey cylinder air alloter.
3.The air scattering is uniform and the mixing effect of air and slurry is good.
4.U-shaped tank, little sedimentation of sand.
5.Solid particles can be fully suspended, high flotation index.
6.Long service life of vulnerable parts.
Working principle
When the flotation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.
Notes for selection
1. While placing your order, in addition to specifying the model and quantity, make sure to provide the flotation circuit and the follows
(1) Configuration scheme and feeding mode
(2) Quantity of the scrapers and mode of drive (right drive or left drive)
(3) Quantities of feeding chambers, intermediate chambers, and crude ore chambers
(4) Other special requirements
2. No electric control cabinet will be supplied.
3. The flashboard will be made according to the manufacturer's drawings. And the electric driven flashboard will be adopted for large-scale flotation machine
Technical Data of flotation machine
Model | Valid Volum (m³) | Impeller Diameter (mm) | Capacity (m3/min) | Impeller Speed (r/min) | Motor | Dimention (L*W*H) (mm) | Weight of Cell (t) | |||
| Impeller | Scraper | |||||||||
Model | Power(kw) | Model | Power(kw) | |||||||
| SF-0.15 | 0.15 | 200 | 0.06-0.18 | 536 | Y90L-6 | 1.5 | Y801-4 | 0.55 | 500×500×600 | 0.27 |
| SF-0.37 | 0.37 | 300 | 0.2-0.4 | 386 | Y90L-4 | 1.5 | Y801-4 | 0.55 | 900×700×750 | 0.5 |
| SF-0.65 | 0.65 | 350 | 0.3-1.0 | 400 | Y132S-6 | 3 | Y90L-6 | 1.1 | 700×900×900 | 1 |
| SF-1.2 | 1.2 | 450 | 0.6-1.6 | 312 | Y132S2-6 | 5.5 | Y90L-6 | 1.1 | 1100×1100×1100 | 1.5 |
| SF-2.8 | 2.8 | 550 | 1.5-3.5 | 270 | Y160L-6 | 11 | Y90L-6 | 1.5 | 1700×1600×1150 | 2.3 |
| SF-4 | 4 | 650 | 2-4 | 220 | Y200L-8 | 15 | Y100-6 | 1.5 | 1850×2050×1200 | 2.8 |
| SF-8 | 8 | 760 | 4-8 | 191 | Y250M-8 | 30 | Y100-6 | 1.5 | 2200×2900×1400 | 4.3 |
| SF-10 | 10 | 760 | 5-10 | 191 | Y250M-8 | 30 | Y100-6 | 1.5 | 2200×2900×1400 | 4.6 |
Delivery of Flotation Machine:
Company introduction :
From factory establishment, we have been insisting manufacturing full set of beneficiation equipments. With over 20 years' experience, we still enjoy this advantage to give the clients mature workflow, reasonable design, accurate manufacture, best after-service. If you want to beneficiation ferrous ore or non-ferrous ore, you are luck to choose me- the right one.
Henan Xing yang Mining Machinery Manufactory is a mining machinery manufacturer .The leading products include whole set mine-selecting equipment and sandstone equipment, such as ball mills, crushers, grinders, magnetic separators, flotation machines, classifiers, driers, sand-makers, vibrating screens, sand washers, conveyors and so on.
Why choose us :
1.What is the raw material for the production line?
2. What is the capacity per hour you required?
3. What is the maximum input size of the raw material?
4. What is the output size and application for the final product? Once we get your answers, I can provide you the best quotation immediately.
Remarks: The price will depend on different models. Reply message you will get 5% discount price.
Why choose us ?
1.We are real manufacture factory ( not dealer)
All machines from Henan Xingyang Mining Machinery Manufactory are made by ourselves, with lower price, good quality and assured full after service; So please buy machine from factory.
2. With senior engineers for research and development.
3. We'd like to recommend a suitable type for you and send you a best quotation./3). If you are new for this business, we will help you
