Audited Supplier
PC600X400
Hammer Crusher
AC Motor
22kw
Construction
Limestone
Below 30mm
400×600mm
New
Hammer Crusher
10-22m3/H
1.5t
Manganese Alloy Steel
as Customer Requirement
citichl
in Container
1200x1050x1200mm
China
8474209000
Product Description
Small size hammer mill crusher for crushing glass bottle
Application of hammer crusher:
This series of hammer crushers is suitable for crushing various materials of brittleness such as coal, gangue, coke, slay, shale and loose lime stone etc. Whose compressive resistance does not exceed 100Mpa and the surface moisture content should not be greater than 8%.
Working principle of hammer crusher:
The main wroking part of hammer crusher is rotor with hammer, the rotors consist of main shaft, disk, pin shaft and hammers.The motor drives the rotor to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by high-speed hammer. There is a screening palte under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until they reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.
Application of hammer crusher:
This series of hammer crushers is suitable for crushing various materials of brittleness such as coal, gangue, coke, slay, shale and loose lime stone etc. Whose compressive resistance does not exceed 100Mpa and the surface moisture content should not be greater than 8%.
Working principle of hammer crusher:
The main wroking part of hammer crusher is rotor with hammer, the rotors consist of main shaft, disk, pin shaft and hammers.The motor drives the rotor to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by high-speed hammer. There is a screening palte under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until they reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.
Hammer crusher features:
1.It is of various types.
2.It is suitable for crushing maximum, medium and minimum stones.
3.It is easy to be operated.
Technical parameters:
| Type | Model | Feed size (mm) | Discharge Size(mm) | Capacity (m3/h) | Motor | Weight(t) | Overall Size ( L*W×*H )(mm) | |
| Number of Poles | Power(kw) | |||||||
| Hammer Crusher | PC400×300 | ≤200 | ≤10 | 5-10 | 4 | 11 | 0.8 | 900×670×860 |
| PC600×400 | ≤250 | ≤15 | 10-22 | 4 | 22 | 1.5 | 1200×1050×1200 | |
| PC800×600 | ≤250 | ≤15 | 18-40 | 4 | 55 | 3.8 | 1310×1180×1310 | |
| PC1000×800 | ≤350 | ≤15 | 25-50 | 4 | 75 | 4.9 | 1600×1390×1575 | |
| PC1000×1000 | ≤300 | ≤19 | 30-55 | 6 | 132 | 8 | 1800×1590×1775 | |
| PC1250×1250 | ≤350 | ≤19 | 35-65 | 6 | 180 | 14 | 2060×1600×1890 | |
| PC1400×1400 | ≤350 | ≤25 | 50-100 | 6 | 280 | 32 | 2365×1870×2220 | |
| PC1600×1600 | ≤350 | ≤35 | 100-150 | 8 | 480 | 37.5 | 3050×2850×2800 | |
If any question or needs pls call me freely at mobile phone : 0086-13353909201
