Audited Supplier
RX24
Fixed Resistor
Protective Resistor, Load Resistor, Shunt Resistor, Sampling Resistor
SIP Resistor
Wire-wound Resistor
Surface Mount
Thermal Resistor
Single Connection
Square
Linear Scale
Medical Apparatus and Instruments
Qh
0.51ohm;-20.0K Ohm
50W
29*73mm
10PCS
Yes
QH
Carton
Customized
China
Product Description
Chief Characteristic:
1.Structure: Aluminum housed
2.Fillings: expoxy
3.Core: ceramic rod n(A12O3 comtent over 75%)
4.Power Range: 5W~50W
5.Resistance range: 1ohm~20k ohm
6.Resistance tolerance: ±1%~±5%
7.Resistance temperature cofficient: ±100ppm~±400ppm
8.Specialty: With aluminum-housed heat sink, small size, high power, good stability.
Non-inductive products are available.
suitable for installation in heat diffusing plates
No heat diffusing plates installation, the power must be cut off 1/2
Structure and installation Size
Note:
When using the resistor, you should be equipped with the corresponding etalon of the heat radiator panels , if no equipped with, the power load should be cut in half.
Applications scope:
1.Be able to use in the domain of the electric power,electric locomotive ,machine-electric equipment etc.
2.They are Perfect elements of the power absorption and load.
3.Principally used in electronic test equipment,high voltage switch, high voltage electric transport,large power electrical, electronic specialized precision instrument, new type medical equipment manufacture and high voltage electrostatic precipitator etc
Other Details:
1.The resistor is used in DC or low frequency AC circuits.
2.We can provide the non-inductance resistor if it will be used in high frequency circuit.
1.Structure: Aluminum housed
2.Fillings: expoxy
3.Core: ceramic rod n(A12O3 comtent over 75%)
4.Power Range: 5W~50W
5.Resistance range: 1ohm~20k ohm
6.Resistance tolerance: ±1%~±5%
7.Resistance temperature cofficient: ±100ppm~±400ppm
8.Specialty: With aluminum-housed heat sink, small size, high power, good stability.
Non-inductive products are available.
suitable for installation in heat diffusing plates
No heat diffusing plates installation, the power must be cut off 1/2
Structure and installation Size
| Type | Rated Power (W) | Resistance Range (Ω) | Resistance Tolerance(%) | ResistanceCoefficient(ppm/°C) | Tolerant Voltage (Vac RMS) |
| RX24 | 5w | 0.51-1.0K | 1(F) | R≥10Ω : ±250 5Ω<R<10Ω: ±500 R≤5Ω : | 500V |
| 10w | 0.51-1.5K | 2(G) | 1500V | ||
| 25w | 0.51-8.2K | 5(J ) | |||
| 50w | 0.51-20.0K | 10(K) | 2000V |
When using the resistor, you should be equipped with the corresponding etalon of the heat radiator panels , if no equipped with, the power load should be cut in half.
Applications scope:
1.Be able to use in the domain of the electric power,electric locomotive ,machine-electric equipment etc.
2.They are Perfect elements of the power absorption and load.
3.Principally used in electronic test equipment,high voltage switch, high voltage electric transport,large power electrical, electronic specialized precision instrument, new type medical equipment manufacture and high voltage electrostatic precipitator etc
Other Details:
1.The resistor is used in DC or low frequency AC circuits.
2.We can provide the non-inductance resistor if it will be used in high frequency circuit.
