Audited Supplier
IVG-1
1 Year
Magnetic Sensors
500m
100%
100%
Liquid Level Transmitter
Split Type
1 Year
CE, RoHS
ABS
-20-50
1500m
12VDC, 3W
RS-485 Two-Wire Network,Optional Baud Rates,Factor
Blue Jay
Carton
10*10*10cm
China
Product Description
The IVG-1A water leakage locator can monitor up to 1500 meters of liquid leakage sensor cable. Once liquid is detected, the IVG-1A water leakage locator generates an audible and visual alarm, the digital tube displays the leak location, and starts the relay to generate the local voltage-free contact closure. The IVG-1A water leakage locator is programmed using the modbus RTU protocol, which is convenient for integration with the monitoring system. Due to the low cost of IVG-1A, it is economically feasible to build a solid system through multiple independent sensor cable segments; after setting the same type of sensor cable once, no subsequent adjustment or calibration is required.
IVG1A can be used as a stand-alone leak detection alarm unit or networked with other integrated acquisition hosts.
It is suitable for real-time leak detection in important places such as detection room base stations, warehouses, libraries, museums and industrial sites.
- LED displays power supply, leakage, cable fault and communication status.
- Digital tube displays leakage location and cable fault.
- Can record 32 leakage alarm records.
- Practical and reliable twisted pair serial RS-485 communication, the maximum communication distance can reach 1200 meters, standard industrial modbus protocol.
- 12V DC power supply, non-polarity access.
- Multiple communication baud rates are optional, the module address and communication baud rate are set by software, without the need to use switches.
- Relay output forms are normally open and normally closed at the same time, which can be freely selected.
- Good anti-static, lightning protection, and surge protection technology ensure the reliable operation of the product.
- Convenient DIN rail installation method.
Maximum length | 1500M | |||
Accuracy | 100% | |||
Storage temperature | -40 ºC~60 ºC(0 ºF~140 ºF) | |||
Operating temperature | -20 ºC~50 ºC(32 ºF~122 ºF) | |||
Humidity | 5%~95%(non-condensing) | |||
Power | 12VDC,3W | |||
Network configuration | RS-485 two-wire network,Optional baud rates,factory default 9600 Optional address is 0~255, factory default 0 | |||
Communication protocol | MODBUS RTU | |||
