Audited Supplier
STTP 94%
Specification:
| Sodium tripolyphosphate (STPP) | Batch No.:B20150828 | ||
| Sampling Time:2015-08-28 | |||
| Sampling Spot: Warehouse | |||
| Executive Standard: GB9983-2004 | |||
| Items | Specification | Results | |
| Total phosphate as P2O5%≥ | 94% | 94.5% | |
| The activity of phosphate as P2O5%≥ | 57% | 57.3% | |
| PH (1% solution) | 9.2-10.0 | 9.57 | |
| Solubility | Conformity | Conformity | |
| Iron (Fe) %≤ | 0.007 | 0.0062 | |
| Water Insoluble %≤ | 0.10 | 0.098 | |
| Particle size 1.00 mm test sieve sieve residue %≤ | 5.0 | 5.0 | |
| Whiteness%≥ | 90 | 90 | |
STPP (Na5P3O10) were mostly used as one of the main auxiliaries for synthetic detergent; water softerner (mostly for the boiler); ceramic industry; tanning agent for leather making, auxiliary for dyeing; as an effective dispersion agent for suspensions of coatings, kaolin, magnesium oxide, calcium carbonate and drilling mud, etc; also it used as an oil contamination resistance agent in paper production.
As specification shows above, we could produce the required index product as clients needed. Mostly, the main content for Na5P3O10 , P2O5,Insoluble in water , Fe and PH value were stable. The differences in final usage are Bulk density and I Phase.
For our product, Bulk density between 0.5-0.75 were present granular looking, it always used on ceramic products. After smash, it becomes powder and density were between 0.7-0.95 and we call it 'high density' mostly. As Phase I, detergent industry always need lower index like 20-30 cause the lower Phase I were be better in thermostabilization and its Hydration speed of their final product.
Package:
We support package in 25kg/50kg/1000kg net WPP/PE bags
