S3TW3F2 Flame Retardant Thin Wall Heat Shrink Tube

| S3TW3F2 Flame Retardant Thin Wall Heat Shrink Tube | ||||
| Features | ||||
| Co-extruded dual wall tube | Operating temperature: -55~125 ºC | |||
| Cross-linked flexible polyolefin outer layer | Shrink temperature: 110 ºC | |||
| Thermal melt adhesive liner | High shrink ratio: 3:1 | |||
| Lower Shrink temperature & faster shrinkage | ||||
| Technical Data | ||||
| Property | Test method | Values | ||
| Physical | Tensile strength | ASTM D2671 | ≥10.4 MPa | |
| Breakdown elongation | ASTM D2671 | ≥200% | ||
| Aging | Tensile strength | ASTM D2671 | ≥7.3 MPa | |
| Breakdown elongation | ASTM D2671 | ≥100% | ||
| Water absorption | ASTM D570 | ≤0.5% | ||
| Low temperature flexibility (-40ºC/4hrs) | ASTM D2671 | No cracking | ||
| Heat shock (200ºC/4hrs) | ASTM D2671 | No drop, No flow (outer layer only) | ||
| Electrical | Volume resistivity | ASTM D2671 | ≥1014 Ω.cm | |
| Dielectric strength(2500V AC/60s) | UL 224 | Pass | ||
| Chemical | Flammability | UL 224 | All tubing test pass | |
| Copper corrosion(158ºC/168hrs) | UL 224 | Pass | ||
| Dimensions | 3:1 | |||
| Reference | As supplied(mm) | After recovered(mm) | Standard length | |
| UPM S3TW3F2 | ID min. | ID max. | WT nom. | m |
| 3.2/1.0 | 3.2 | 1.0 | 1.0 | 1.22 |
| 4.8/1.6 | 4.8 | 1.6 | 1.1 | 1.22 |
| 6.4/2.1 | 6.4 | 2.1 | 1.2 | 1.22 |
| 9.5/3.2 | 9.5 | 3.2 | 1.3 | 1.22 |
| 12.7/4.2 | 12.7 | 4.2 | 1.4 | 1.22 |
| 19.1/6.0 | 19.1 | 6.0 | 1.6 | 1.22 |
| 25.4/8.0 | 25.4 | 8.0 | 1.9 | 1.22 |
| ID=Internal Diameter | WT=Total wall thickness | |||
| Typical application | ||||
| Ideal for applications including connector-to-cable sealing, wire harness bundles and splices | ||||
| Ordering | ||||
| Standard color : Black | ||||
| Standard packaging is 1.22m/pc,but spool packaging is available. | ||||
| Cross reference | ||||
| Raychem/ Tyco: DWP-125 | ||||













Audited Supplier









