Audited Supplier
Item no.: JT-FD016
Product name: Three Rooms Hand Solar LED Lighting System
Markets: Poor electricity area, no electricity area, camping lighting
LED lights: 3pcs 1W LED lamp ( Each LED lamp with 5m wire)
USB mobile phone charger:
Charging current: 5V/2A
Charge for all mobile phones
Lighting time:
1pc 1W:24 hrs,
2pcs 1W: 12 hrs,
3pcs 1W:8 hrs,
1W brightness:104 lm;lighting(reading) area: 50sqm
Product Specification:
Solar Panel: 4W,9V/440mA
Solar Panel Wire Length: 5m
Battery Capacity: 6V/4500mAh,Lead-acid or Lithium
LED Lamp Quantity: 3pcs
LED Lamp Wire Length: 5m*3pcs
LED lamp Power: 6V/1W*3PCS
FM radio amd MP3 Player
The whole system pack including:
Solar panel: 1pc
System box: 1pc
LED lamp: 3 pcs
LED lamp wire with switch: 3pcs
Instruction Book:1 pc
Warranty card: 1 pc
Test Report: 1 pc
Product Installation:
Step 1. Place the solar panel under sunlight;
Step 2. Insert the connector on wire of solar panel into system box port with "solar" word indication;
Step 3. Put the system box in any place without water, or hang on wall;
Step 4. Insert the connector of LED wire into system box with "LED" word indication;
According to your actual usage, 5pcs LED lamp are optional to be lighting in the same time; These 4 steps with photos will be shown in "Instruction Book".
When charging for mobile phones, please connecting the system box with "USB" word indication, 12V AC charger is optional to charge the system when using AC power.
Warranty: 2 years, please contact with our after-sales department for quality problem
Life-time(battery capacity): 3 years 100%, 5 years 90%, 8 years 80%
"Exclusive Agent" is allowed in a country or area
Official "Certificate of Authorization" will be provided after confirmation
Our Series and Photos
Quality Assurance Parts: solar panel, Battery, LED Lamp, PCB, Wires
Solar panel:
mono or poly cell crystalline, enough free electron in Silicon atom, the free electron absorb light photon and released, aluminum alloy frame, tempered glass cover, IEC61215, IEC61730 TUV test report, warranty 5 years, life-time with the efficiency: 10 years 100%, 20 years 90%, 30 years 8%;
Battery:
Lithium battery, 1.8*1.8*6.5cm standard size, 800-1000 time circles, made in Japan, wide work temperature, 12 months don't need to charge when in selling; warranty: 2 years, life-time:3-5 years 90% capacity, 5-8 years 80% capacity;
LED Lamp:
Lamp Crust: Aluminum alloy for hot dissipation(not for plastic crust), LED chips: famous brand in high efficiency(high light-electricity transformation); LED chips board: aluminum, to keep hot transmitting,(heat conductivity coefficient:1.5W, thickness:1.0mm)
(Work temperature decide the life-time of LED chips, hot transmitting and dissipation is necessary for a long life-time LED lamp, 36sqcm hot dissipation area for 1W is standard)
Warranty 2 years, life-time: 5 years 100%, 8 years 90%, 10 years 80%
PCB:
Board material: Glass fiber board, Function: battery over-charge and over-discharge protection, Constant current discharge for LED lighting, "LED indicator" for charging status, 5V/1A IC to protect charging current, IC component control for each group of LED lighting; warranty 5 years; life-time: more than 10 years;
Wires:
China Standard 3mm-4mm copper material wire, low resistance and long life-time, DC and AC current allowed, switch controller, E22,E27,B22 LED lamp holder; warranty 5 years, life-time: more than 10 years
