Audited Supplier
1. Solar Flood Light with 2.4G Remote Control is an advanced commercial-grade energy-efficient lighting system .
2. One Remote Control can be linked to up to Four Groups Flood Lights, Each Group can up to 256 Lights.
3. These Lights can be combined into a lighting system.and when one of the lights detects movement, all lights linked to the remote control will
be turn on.
4. The detection distance of this sensor is 8-10 meters, The controllable range between the lights can be up to 100m.
5. Bright Powerful 30W lighting supplied by 120 LED SMD3030 with adjustable brightness 8% to 100% via the Remote Controller.It can last for
36hours at 8% brightness.
6. The light can be operated with Remote pad or manually switch . Press and Hold the Dimmer+/Dimmer-. All lights can be dimmed together.
7. The Sensor can be set a delay time(Time Knob) and adjusted ambient brightness (LUX Knob). See the PIR PAD diagram.
8. Even if the remote control turns off all lights, the Sensor will still turn on all lights when someone enters the detection area.
9.Ultra long battery life-such as setting a delay of 15 seconds for lighting and sensing 100 times per night, which can last for 5-7 days.
Charging Indicator Light
1. Solid Green LED = Battery full Charged
2. Flashing Green or Yellow or Red = Battery charging
3. Battery Level Display:
Green LED = High Volt ( >18.5V ),
Yellow LED = Medium Volt (18.5-16.5V),
Red LED = Low Volt (<16.5V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.
# Once a program mode is selected the light cannot be turned ON/OFF or dimmed with the Master button. Choose button '4o' (RF mode) to revert to standard mode to control these functions.
Programme Clear
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
1. Turn on the light.
2. Quickly press Master " I " key 5 times.
3. LED lights will blink 5 times which means that the Programme is cleared successfully.
Adjust the PIR Sensor
LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.
TIME Dial: Adjust delay time from 5 seconds to 5 minutes.
SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).
A: We are a manufacturer. Welcome OEM and ODM for you.
2. Can we have a sample order?
A: Of course! Any sample order is welcome for testing and checking.
3.What is the warranty for the products?
A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years
4. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3weeks.
5.How to ship the goods?
A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)
6.How to deal with the faulty?
A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.
