Audited Supplier
A solenoid valve is an electrically controlled valve that shuts off or allows fluid flow from one point to the other. The valve consists of 3 main components: a solenoid coil, a solenoid armature and a valve body.
Solenoid Coil consists of several turns of enameled wire, taking a cylindrical shape and hollow from the inside. When current flows through the coil, a corresponding magnetic field is produced.
Solenoid Armature is the pressure-tight internal part of a solenoid valve. We produces its components from round material in brass, as well as from stainless steel using diverse alloys. The selection of the sealing material (elastomer) is always based on the operating and ambient conditions of the application.
| BRANDO Model | BB15230206 |
| Voltage | 12VDC, 24VDC, 24VAC, 110VAC, 220VAC |
| Power | 8W, 10W, 14W, 19W, 20W |
| Other voltage and power can be customized | |
| Connection Type | Embedded Screw Terminal |
| Insulation Class | F, H |
Different Applications
Different Coil Hole ID, Different Plunger Tube OD
How to choose a matching solenoid coil?
3. Dimension: Inner hole diameter, height and width.
4. Working Environment: temperature, humidity, indoor or outdoor, protection grade.
5. Connector Type: pin type, flying leads type, standard interface, etc.
6. Application: some special application areas require the use of specially designed solenoid coils, such as industries that require waterproof, must use IP67 or higher grade solenoid valve coils.
7. Other Requirements: such as environmental protection material requirements or certification.
