Audited Supplier
PU-1
3-5years
ISO, MSDS
1.5mm
Waterproofing
Roof
Yes
UV Resistant
Waterproof Paint
Liquid
PU
Film Coated
Waterproof
Grey
Indoor
3-5years
Polyurethane
EONZEAL
Pails
20kg/pail
China
Product Description
Solvent Based Polyurethane Liquid Water Proofing Membrane Manufacture in China
DESCRIPTION
Solvent based polyurethane waterproofing coating is a moisture-cured waterproof coating, form a seamless film by absorbing moisture from the air; with high flexibility and elongation, strong ability to substrates deformation, waterproof life up to 15 years.
FEATURES
TECHNICAL DATA
All measurements are taken at 22ºC and 50% relative humidity. Specifications vary
according to site conditions and should be taken as a guide only.
COVERAGE
Recommend dosage: 1.65 kg/sqm, 1mm thickness, total thickness no less than 1.5mm.
SHELF LIFE
Do not store product exposed to weather and sun. When kept in a cool, dry and protect area, sealed pail have a 12-months shelf life.
SURFACE PREPARATION
External corner: D≥ 10mm
APPLICATION GUIDANCE
PRECAUTION
DESCRIPTION
Solvent based polyurethane waterproofing coating is a moisture-cured waterproof coating, form a seamless film by absorbing moisture from the air; with high flexibility and elongation, strong ability to substrates deformation, waterproof life up to 15 years.
FEATURES
- Ready to use straight from the pail
- Stable performance
- 540% high elongation
- Solvent based, can be compounded with high polymer membrane and self-adhesive modified bitumen waterproof membrane
- Non-toxic, environmentally-friendly
- Available in red, black or grey
TECHNICAL DATA
| ITEM | STANDARD | RESULT |
| Appearance | Red or grey or black liquid | / |
| Solid content,% ≥ | 85 | 90.4 |
| Elongation,%≥ | 500 | 542 |
| Surface drying time, h≤ | 12 | 8 |
| Fully drying time, h≤ | 24 | 20 |
| Tensile strength, MPa≥ | 2 | 2.97 |
| Tear strength, N/mm≥ | 15 | 26 |
| Low temperature flexibility,ºC≤ | -35 ºC no cracking | Pass |
according to site conditions and should be taken as a guide only.
COVERAGE
Recommend dosage: 1.65 kg/sqm, 1mm thickness, total thickness no less than 1.5mm.
SHELF LIFE
Do not store product exposed to weather and sun. When kept in a cool, dry and protect area, sealed pail have a 12-months shelf life.
SURFACE PREPARATION
- All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds, release agents and any other loose or contaminating material
- Prior to application, remove all sharp protrusions, which may pierce the membrane
- The external and internal corner are made to be arc.
External corner: D≥ 10mm
APPLICATION GUIDANCE
- LEVELING: Substrate should be smooth and firm.
- CLEANING: No garbage, floating pulp on the substrate, keep it dry. Prime the concrete surface
- FIRST COATING: The first layer should be very thin, covering the substrate is enough, less than 0.5mm thickness.
- SECOND & THIRD COATING: Apply the second layer provided the first layer is cured. Coating direction is vertical to the first one and then the third layer`s direction is the same as the first one.
PRECAUTION
- Second layer is the thickest one, the third one is very thin, just for leveling.
- Interval time depends on the application site, but typically full drying time is about 20 hours.
- Fiber reinforcing layer is necessary for inside corner internal corner, floor drain, pipe joints etc, the lap width should not be less than 100mm, extensive application after joints treatment.
- Use PU out after opening, time within 8 hours. Long-term storage will cause the forming of a thin film on the surface. Remove this when application. Does not affect the performance of product.
