- The EWR-L series electric wheelchair boarding guide is mainly used in low-floor urban buses (first-level step buses). It is installed under the steps, does not cause obstacles to passengers getting on and off the bus normally, and does not occupy space in the bus. All actions are controlled by standard push button switches (installed on the instrument panel). In the extended position, the rear end of the guide is automatically lifted to eliminate the height of the step threshold, so that the rear end of the guide is flush with the floor, which is convenient for wheelchairs to enter and exit. The guide is made of aluminum, honeycomb aluminum plate and stainless steel, with light weight and strong anti-corrosion performance. It meets the standard requirements of "GB-13094-2017 Passenger Bus Structural Safety Requirements".
It is installed under bus chassis, and it doesn't obstruct view, access and emergency exit. |
It is driven by motor. |
It is controlled by switch. |
Main material is aluminum, which is light and with high corrosion resistance. |
This ramp has got two patents. |
doesn't obstruct view, access and emergency exit when not in use;
warning sound during working;
manual backup function;
door interlock function;
anti-skip platform;
ramp will stop when touch some barrier during extending out;
optional function of 15kg loading induction;
Voltage: 24Vdc or 12Vdc;
Max. Driving Current: 10A
Power: 40W;
Max Loading Capacity: 350 Kg
Eliminate threshold drop: 60mm





