Audited Supplier
Zinc stearate Flash Dryer Flash Drying Machine Flash Drying Equipment
| Model | Container diameter mm | Main dimensions mm | Power kw | Air volume m3/h | Water evaporation kg/h | Floor space m2 |
| SXG-2 | 200 | 300×2800 | 0.75 ~ 2.2 | 300 ~ 800 | 10 ~ 20 | 3.5×2.5 |
| SXG-3 | 300 | 400×3300 | 3 ~ 4 | 600 ~ 1500 | 20 ~ 50 | 3.8×2.7 |
| SXG-4 | 400 | 500×3500 | 4 ~ 7.5 | 1250 ~ 2500 | 25 ~ 70 | 4×3 |
| SXG-5 | 500 | 600×4000 | 5.5 ~ 11 | 1500 ~ 4000 | 30 ~ 100 | 4.2×3.2 |
| SXG-6 | 600 | 700×4200 | 7.5 ~ 18.5 | 2500 ~ 5000 | 40 ~ 200 | 4.25×3.25 |
| SXG-8 | 800 | 900×4600 | 11 ~ 18.5 | 3000 ~ 8000 | 60 ~ 300 | 4.5×3.5 |
| SXG-10 | 1000 | 1100×5000 | 15 ~ 30 | 5000 ~ 12500 | 100 ~ 480 | 4.75×3.75 |
| SXG-12 | 1200 | 1300×5200 | 15 ~ 37 | 10000 ~ 20000 | 150 ~ 745 | 5×4 |
| SXG-14 | 1400 | 1500×5400 | 30 ~ 55 | 14000 ~ 27000 | 200 ~ 960 | 5.25×4.25 |
| SXG-16 | 1600 | 1700×6000 | 45 ~ 75 | 18700 ~ 36000 | 250 ~ 7303 | 5.5×4.5 |
Working Principle of SXG Rotating Flash Drying Machine
Hot air in tangential direction enters into the bottom of the rotary flash dryer, and forms strong rotational wind field under the action of stirrer. The materials get into the drying equipment from screw feeder, under the strong effect of the high-speed rotating impeller, the materials are dispersed after being rubbed and sheared. Bulk materials are quickly crushed and fully contacted with the hot air in order to complete drying. Dehydrated dry materials rise with the hot air, the grading ring will retain the large particles and the small ones will be excluded from the rotating flash drying machine through the ring center. The cyclone separator and dust remover will recover these materials. The wet or bulk materials will be threw to the container wall by centrifugal force, and fall into the bottom of the flash dryer to be crushed and dried again
Features1. SXG rotating flash drying machine is equipped with a special cooling device at the bottom, thus avoiding material deterioration due to high temperature.
2. Wind distribution device can reduce the resistance to drying equipment and provide air volume for the dryer.
3. This rotary flash dryer uses particular pressurized sealing device and bearing cooling device to effectively prolong the service life of the drive part.
4. Material fineness and final moisture content can be adjustable.
5. Short staying time of material can prevent the material from sticking to the wall and the thermosensitive material from deteriorating.
