Audited Supplier
SS-22
Adjust
Combination
Non-Linear
Continuous
Automatic Control
CE
New
Customized
Plastic
Single Phase or Three Phase
110V 220V 230V 380V 400V 415V 440V 540V 660V
6W 10W 15W 20W 25W 30W 40W 60W 90W 120W 200W
0.18kw 0.25kw 0.37kw 0.55kw 0.75kw 1.1kw 1.5kw
Electric Motor, Fan, Pump
ANG Drive
Carton+Pallet
100*60*117mm
China
8537101190
Product Description
SS-22 Built in Split Type Control Box Internal SS22 Price Speed Adjusting Governor Regulator Controller for Single Phase AC Motor
Method of use:
1. Turn off the power, connect it according to the wiring diagram and make sure the connection is correct.
2. Fix the controller and set the speed to the lowest "0", so as to avoid sudden large current and permanent damage when starting the power supply.
3. Turn on and adjust the speed knob to the desired position.
4. The governor is connected to the motor. If the torque or speed is found to be inconsistent with the requirements, please adjust the fine-tuning potentiometer on the side of the product.
5. To change the running direction of the motor, simply exchange the white wire and black wire.
6. All pins may have high voltage, please do not touch when powered on.
7. Make sure you wire it correctly! The pins should not be short-circuited to avoid damaging the device.
(when changing direction, do not change the direction until the motor stops running completely.)
FAQ
Q: Can you make the speed controller with customization?
A: Yes, we can customize per your request, like label, packing, power, voltage, connectors, capacitors, etc.
Q: Do you provide samples?
A: Yes. A sample is available for testing.
Q: What's your lead time?
A: Standard products need 5-30 days, a bit longer for customized products.
Q: Do you provide technology support?
A: Yes. Our company has a design and development team, we can provide technology support if you
need.
Q: How to ship to us?
A: It is available by air, by sea, or by train.
Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.
Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.
- It is used in motor and electric device, together with speed sensor.
- Advantages: small volume, wide speed range, stable mechanical performance.
- Green LED indicator, on/ off switch for controlling, knob switch for adjusting speed
- Typical industry: packaging machine, printing machine, food machine, textile machine, etc.
| Working Voltage | AC 220V±10, 110V±10, |
| Frequency | 50/60Hz |
| Application | Single Phase AC Motor |
| Output Power | 6W 10W 15W 25W 40W 60W 90W 120W 180W |
| Speed | 90-1400r/min 50Hz 108-1680r/min 60Hz |
| Ambient Tem. | -10 ºC ~ 50 ºC |
| External dimension | 80 × 40 × 57.5mm |
| Mounting | Panel Screw Install |
| Potentiometer | External |
Method of use:
1. Turn off the power, connect it according to the wiring diagram and make sure the connection is correct.
2. Fix the controller and set the speed to the lowest "0", so as to avoid sudden large current and permanent damage when starting the power supply.
3. Turn on and adjust the speed knob to the desired position.
4. The governor is connected to the motor. If the torque or speed is found to be inconsistent with the requirements, please adjust the fine-tuning potentiometer on the side of the product.
5. To change the running direction of the motor, simply exchange the white wire and black wire.
6. All pins may have high voltage, please do not touch when powered on.
7. Make sure you wire it correctly! The pins should not be short-circuited to avoid damaging the device.
(when changing direction, do not change the direction until the motor stops running completely.)
FAQ
Q: Can you make the speed controller with customization?
A: Yes, we can customize per your request, like label, packing, power, voltage, connectors, capacitors, etc.
Q: Do you provide samples?
A: Yes. A sample is available for testing.
Q: What's your lead time?
A: Standard products need 5-30 days, a bit longer for customized products.
Q: Do you provide technology support?
A: Yes. Our company has a design and development team, we can provide technology support if you
need.
Q: How to ship to us?
A: It is available by air, by sea, or by train.
Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.
Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.
