Audited Supplier
The raw material is stainless steel ingots, using electric stoves which melt the stainless steel ingots to become 1500 ~ 1600 ºC steel liquid, and then with a grooved high speed rotating melt-extracting steel wheel which produces wires that meets are our customers' specific requirements. When melting down to a wheel steel liquid surface, the liquid steel blow out by slot with centrifugal force at extremely high speed with cooling forming. Melting wheels with water keep the cooling speed. This method is done to produce different material, different sizes of steel fiber.
| SIZE | CHEMIC ELEMENT(%) | ||||||
| C | P | Mn | Si | Cr | Ni | Al | |
| AISI330 | ≤0.30 | ≤0.04 | ≤2.00 | ≤0.75 | 17~20 | 33~37 | |
| AISI310 | ≤0.30 | ≤0.04 | ≤2.00 | ≤1.50 | 24~26 | 19~22 | |
| AISI316 | ≤0.30 | ≤0.04 | ≤2.00 | ≤1.00 | 16~18 | 10~14 | |
| AISI314 | ≤0.30 | ≤0.045 | ≤2.00 | 1.5-3.0 | 23~26 | 19~22 | |
| AISI309 | ≤0.30 | ≤0.04 | ≤2.00 | ≤1.00 | 22~24 | 12~15 | |
| AISI304 | ≤0.30 | ≤0.04 | ≤2.00 | ≤2.00 | 18~20 | 8~10 | |
| AISI301 | ≤0.30 | ≤0.04 | ≤2.00 | ≤2.00 | 16~18 | 6~8 | |
| AISI201 | ≤0.30 | ≤0.06 | 5.5~7.5 | ≤1.00 | 16~18 | 3.5~5.5 | |
| AISI446 | ≤0.30 | ≤0.04 | ≤1.50 | ≤2.00 | 23~27 | ||
| AISI430 | ≤0.30 | ≤0.03 | ≤1.00 | ≤2.00 | 16~18 | ||
| NAS430A | ≤0.30 | ≤0.03 | ≤0.50 | ≤0.50 | 16~18 | 2~4 | |
| SIZE(mm) | ||||
| length | 20 | 25 | 30 | 35 |
| width | 0.75~1.5 | 0.75~1.5 | 0.75~1.5 | 0.75~1.5 |
| thickness | 0.2~0.75 | 0.2~0.75 | 0.2~0.75 | 0.2~0.75 |
APPLICATION :
1. Metallurgical industry
The refining outside the furnace airbrush, dipping tubes, slag dam, bag lining cover, the triangle electric furnace, furnace cover, the molten iron trench cover, the torpedo cans, coke oven door, the heating furnace of steel rolling door, furnace roof, burn tsui, annular furnace baffle wall, hearth roll, forging steel furnace, steel tanks etc, items can be used for various refractory kiln linings.
2. The construction industry
Steel fiber mixed with mixes clay is rapid development of new composite materials in recent years, especially for the steel fiber concrete fastest development. Steel fiber with excellent tensile, bending, shear and crack resistance, impact resistance, resistance to fatigue, high toughness properties, are all items widely used in construction, road, bridge, tunnel, airport pavement, hydraulic harbor, military engineering, all kinds of buildings and products etc.
3. Kiln
Sintering furnace, reduction furnace, finer, the flue, furnace burning tsui and other heat-resistant linings.
4. Petroleum chemical industry
Especially in the refining the lining of catalytic cracking units.
5. Electric power industry
Thermal power plant boiler heat resistant linings.
6. Environmental protection industry
Incinerator.
Hengyang Steel Fiber Co.,Limited is a manufacturer of Steel Fibres, Melt Extracted Steel Fiber, Stainless Steel Fiber,Refractory Material ,Steel Needle, Steel Anchors, Steel Wool with well-equipped testing facilities and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in the chemical industry, the highway construction industry, the ceramic industrial field, metallurgy, cement and oil, this include various furnaces, bridges, and tunnels etc. and other industries.
Our products are widely recognized and trusted by users ,Our products sold throughout China and exported to Southeast Asia, Europe, the United States, and other regions get the acceptance and high praise from our customers, The company has passed the ISO9001 international quality management system certification, can meet continuously changing economic and social needs.
The company insists on the "service for clients" spirit of enterprise. The company takes the good faith as the objective, with mutual cooperation development as the goal, the affordable and fine qualities are the starting point, we sincerely hope that the new and old friends can meet together with mutual reciprocity and mutual benefit, and seek common development.
PACKAGE DETAIL: IN CARTON BOX, 20KGS/CARTONS. 50 BOXES/PALLET
| SIZE | PACKAGE SIZE |
| AISI 430 AISI 446 NAS 430A | 270×270×190(mm) or 550×210×140(mm) |
| AISI 304 AISI310 AISI 330 | 270×270×330(mm) or 550×210×210(mm) |
Are you manufacturer or trading company?
We're manufacturer of steel fiber and steel anchors, and we have been working for steel fiber and steel anchors since 1998. Our factory is located in Hengyang City, Hunan Province of China.
What are your main products?
Our main products are melt extracted stainless steel fibers, HCA steel fibers, carbon steel anchors, stainless steel anchors.
What's your packing for steel fibers?
Our regular packing is packed by carton box, 20kgs/carton x 50 cartons on a pallet (1000kgs net weight per pallet). It can also be customized.
What's the lead time?
Lead time usually takes about 7-10 days based on the quantity.
What's your payment term?
We do Trade Assurance on or TT, 30% advance payment and 70% against by copy of BL.
Can you provide additional discount?
Yes, additional discount will be provided based on the quantity, more you purchase from us, more discounts we will provide to you.
For standard size is available,other size is as per your requirements
