Audited Supplier
SST VENT-100-SANP
Gas
RoHS, ISO, CE
High Temperature
Thread
Adjustable
Open
Plug
Plastic
PC
Eptfe
More Than 0.5L/Min
IP65/ IP66/IP67/ IP68/ IP69
6
More Than350 Mbar for 60sec
17mm
Snap Fit Vent
OEM, ODM, Obm
TMZC38065223D01T200308
Plastic Bag and Carton
M05, M08, M12, M16, M20, M32
Fujian
Product Description
ECU Breathable Standard Size Waterproof Snap Fit Vent | |
| Airflow | ≥0.5L/min(△P=12mbar) |
| WEP | ≥350 mbar for 60sec |
| IP Rate | IP68(2 meters underwater, 1hour impervious) |
| Oil Rate | 8 |
| Body Material | PC |
| Membrane Material | ePTFE |
Benefit of metal Screw in venting
2.More safer:apply O ring sealing for better protection
2.Reliable Protection:ePTFE membrane property
4.Durability : designed for chemical resistance, UVIO resistance, thermal endurance, and Hydrolytic stalility
5.Quality assurance:100% inspection and 6.Flame resistance:rate UL94 V-0.
Don't hesitate to contact us at anytime, no matter inquiry, TM message, via email or skype. If we are online,we will reply you at once. Even if sometime we are not online because of time difference, we promise you will be replied within 8 hours.
INSTALLATION GUIDELINES
1.Clean mounting surface and area where snap-fit vent wil be instaled to remove any contamination. Allow surface to dry
aftercleaning
2.Ideal location for installation is on a fat, vertica surface on an exteror housing wa l. This ocation wil prevent
any liquids fromcollecting
3.Chamfer recommended for optimal O-Ring seal when wall thickness is suitable. When installing vents,
until an audible click is heard. This will ensure aproper seal.
Press-into-place. If there is any specific application, pls feel free to contact SST for professional instruction.
aftercleaning
2.Ideal location for installation is on a fat, vertica surface on an exteror housing wa l. This ocation wil prevent
any liquids fromcollecting
3.Chamfer recommended for optimal O-Ring seal when wall thickness is suitable. When installing vents,
until an audible click is heard. This will ensure aproper seal.
Press-into-place. If there is any specific application, pls feel free to contact SST for professional instruction.
Advantages :
Using 2 identical lamps and lanterns, the lighting time will last 90min.
The internal pressure of headlamps without waterproof and breathable screw vents increased rapidly and eventually stabilized.
The internal pressure of the headlights increased slowly and gradually tended to zero with the waterproof and breathable screw
vents.
The internal pressure of headlamps without waterproof and breathable screw vents increased rapidly and eventually stabilized.
The internal pressure of the headlights increased slowly and gradually tended to zero with the waterproof and breathable screw
vents.
Control Units_Powertrain,Engine,ECUActuator,Humidity,Temperature, Pressure and Gas sensorHybrid vehicle-lnveter, Charger, Power odule,Battery, Traction motorHeavy-duty Machinary
