Simultaneous Thermal STA Analyzer for Material Composition Analysis TGA-DSC Thermal Analyzer
the same operation.
(TG) effects coupled with the recording of a Differential Scanning Calorimetry (DSC) heat flow signal.
Model | STA-500 | STA-300 | ||
Temperature Range | RT~1550ºC | RT~1450ºC | ||
Temperature Resolution | 0.01 ºC | |||
Temperature Fluctuation | ± 0.1ºC | |||
Heating Rate | 1 ~ 100 ºC / min | |||
Temperature Control Mode | Rising temperature, Cooling temperature, Constant temperature | |||
Constant Temperature Time | 0~300min, settable | |||
Cooling Time | 15min (1000ºC~100ºC) | |||
Weighing Range | 0.01mg~3g (Can be extended to 30g) | |||
DSC Measure Range | 0~±600mW | |||
DSC Resolution | 0.001mW | |||
Weighing Accurate | 0.01mg | |||
Display | 24 bit color, 7 inches LCD Touch Screen | |||
Atmosphere | Inertia, oxidability, reducibility, static and dynamic | |||
Atmosphere Device | Built-in gas flow meter, including switch two way gas and control flow volume | |||
Software | Intelligent software can record TG curves automatically, processing data and print experimental statements | |||
Data Interface | USB | |||
Power | AC220V 50Hz | |||
Software | Can be switched to meet differential, differential heat, thermogravimetric, synchronous heat application switching test |


et
2. Tray sensor, made of alloy wire seiko, with high temperature resistance, oxidation resistance, corrosion resistance and other advantages.
3. Power supply, the circulation cooling part is separated from the main engine to reduce the influence of heat and vibration on the microthermal balance.
4. The upper open cover structure is convenient to operate. It is very difficult to put samples in the upper moving furnace body, and it is easy to damage the sample bar.
5. The host machine adopts isolated heating furnace body to the thermal impact of the chassis and micro thermal balance.
6. Furnace body can be replaced according to customer requirements.
Comments from our clients !!!




Packing:
1. Out packing:Standard export wooden case.
2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
Shipping:
You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt of your order. It's more preferable for you to provide us with your own FEDEX/DHL account number so that the delivery charge can be charged directly from your account.
IEC60695 Glow Wire Flammability Temperature Tester, Glow Wire Combustion Resistance Testing Machine, Glow Wire Burning Tester.
1.Are your company a trading one or a factory ?
OEM is also acceptable for us.
2.How to choose the most suitable products?
Our team will give you the best suggestion as long as you tell us what kind of test you need to do and the required specification.
3.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.
4.Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
5.Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.
