Audited Supplier
EN 1.4016 / 430 /10Cr17
Stainless Steel Coils
ASTM, AISI, GB, JIS, DIN, EN
400 Series
ISO
Sheet
Cold Rolled or Hot Rolled
2b/No.1
70-1500mm
Mill Edge / Slit Edge
2 Tons
Kitchenware, Stamping Parts, Flux-Cored Wire
Not Annealing and After Annealing
DSM
Wooden Pallet, Steel Pallet, Waterproof Paper
thickness 0.5-60mm
Shanxi, China (Mainland)
722020
Product Description
Products and parameters:
Grade:
12X17/430/1.4016
Description:
430 is one of the most widely used of the "non-hardenable" ferritic stainless steels. With nominal 16% chromium it combines good corrosion resistance and heat and oxidation resistance up to 1500 °F (816 °C) with good mechanical properties. Type 430 is a non-stabilized stainless steel and as such is not suitable for all welded applications.
Application:
automotive trim and molding/ furnace combustion chambers/ dishwashers/ range hoods/ gas burners on heating units/ gutters and downspouts and flatware.
Corrosion Resistanc:
430 has excellent corrosion resistance, including high resistance to nitric acid as well as to sulfur gases and many organic and food acids. This alloy does not provide the resistance to pitting by dilute reducing acids that is provided by the chromium-nickel stainless steels. Because of its relatively high chromium content, the material provides good resistance to oxidation. Its maximum scaling temperature is 1500 °F (816 °C) for continuous service.
Formability:
Type 430 is readily drawn and formed. Its drawing characteristics are similar to those of low-carbon steel, although it is stronger in the annealed condition and will require stronger tooling and increased power. It is also adaptable to most hot-forming operations.
Weldability:
This ferritic class of stainless steels is generally considered to be weldable by common fusion and resistance techniques. Special consideration is required to avoid brittle weld fractures during fabrication by minimizing discontinuities, controlling weld heat input, and occasionally warming the part somewhat before forming. This particular alloy is generally considered to have slightly poorer weldability than the most common alloy of the stainless class, Type 409, but better than standard non-stabilized Type 410 with higher carbon. A major difference is the addition of aluminum to control hardening, which results in the need for higher heat input to achieve penetration during arc welding. When a weld filler is needed, American Welding Society (AWS) Classification ER/EC430, E430TX-X, ER/EC309L, or E309LT0-3 wires may be used
Chemical Composition
Performance
Factory Information:
DSM has obtained ISO9001:2008,TS16949,BV and SGS certification. During our 19 years of working on 400 series stainless steel and special metal semimanufactures, Shanxi DSM has been proudly serving over 8000 customers in both domestic and oversea markets and various industries including Aviation, Automobile, Petrochemical, Textile, Hardware, Medical Apparatus, Electronic Product, Kitchenware and Cutlery.
Company Information:
Shanxi Disiman Special Metal Technology Co., Ltd
Dedicating to 400 series and special metal, DSM is a leading enterprise specializing in trading, processing, marketing and delivering. We have cold rolling and Precision Strip Steel factories together with advanced processing instruments, including but not limit to multiple Sendzimir Mills, AGC Four-high Mill, Annealing line, Degreasing Machine, Withdrawal Straightener, Decoiler Machine and Slitting Machine. High quality of end products will be guaranteed on multiple indexes such as hardness,tensile strength, yield strength, elongation, composition and Metallography.
DSM has five major processing factories located in Taiyuan, Wuxi, Foshan, Tianjin, Yangjiang and a branch office in Shanghai.We have most of the those famous steel mills in China as our suppliers and as well as a spot trading platform for 400 series with complete specifications and more than fifteen thousand tons of inventory reserve. As a front-end workshop for steel product manufacturers, we can customize steel belt with thickness from 0.08 to 60 mm and width from 4.6 to 1800 mm.
DSM has obtained IS09001:2008, TS16949, BV and SGS certification. During our 19 years of working on 400 series stainless steel and special metal semi-manufactures, Shanxi DSM has been proudly serving over 8000 customers in both domestic and oversea markets on various industries including Aviation, Automobile, Petrochemical, Textile, Hardware, Medical Apparatus, Electronic Product, Kitchenware and Cutlery.
Having the foothold in China, having the world in view', we step forward to develop steel deep processing, create our own manufacture and distribution cluster as well as extend the whole industry chain. With the belief 'Top client, Top quality', we are going to build DSM as a 400 series iron city!
We have supporting Cold Rolling and Precision Strip Steel factories together with advanced processing instruments, including but not limit to Sendzimir Mills (more than 20 sets), AGC Fourhigh Mill, Annealing line, Degreasing Machine, Withdrawal Straightener, Decoiler Machine and Slitting Machine. High quality of end products would be guaranteed on multiple indexes such as hardness, tensile strength, yield strength, elongation, composition and Metallography.
FAQ:
Grade:
12X17/430/1.4016
Description:
430 is one of the most widely used of the "non-hardenable" ferritic stainless steels. With nominal 16% chromium it combines good corrosion resistance and heat and oxidation resistance up to 1500 °F (816 °C) with good mechanical properties. Type 430 is a non-stabilized stainless steel and as such is not suitable for all welded applications.
Application:
automotive trim and molding/ furnace combustion chambers/ dishwashers/ range hoods/ gas burners on heating units/ gutters and downspouts and flatware.
Corrosion Resistanc:
430 has excellent corrosion resistance, including high resistance to nitric acid as well as to sulfur gases and many organic and food acids. This alloy does not provide the resistance to pitting by dilute reducing acids that is provided by the chromium-nickel stainless steels. Because of its relatively high chromium content, the material provides good resistance to oxidation. Its maximum scaling temperature is 1500 °F (816 °C) for continuous service.
Formability:
Type 430 is readily drawn and formed. Its drawing characteristics are similar to those of low-carbon steel, although it is stronger in the annealed condition and will require stronger tooling and increased power. It is also adaptable to most hot-forming operations.
Weldability:
This ferritic class of stainless steels is generally considered to be weldable by common fusion and resistance techniques. Special consideration is required to avoid brittle weld fractures during fabrication by minimizing discontinuities, controlling weld heat input, and occasionally warming the part somewhat before forming. This particular alloy is generally considered to have slightly poorer weldability than the most common alloy of the stainless class, Type 409, but better than standard non-stabilized Type 410 with higher carbon. A major difference is the addition of aluminum to control hardening, which results in the need for higher heat input to achieve penetration during arc welding. When a weld filler is needed, American Welding Society (AWS) Classification ER/EC430, E430TX-X, ER/EC309L, or E309LT0-3 wires may be used
Chemical Composition
| C≤% | Mn≤% | P≤% | S≤% | Si≤% | Cr% | Ni≤% |
| 0.12 | 1.00 | 0.040 | 0.030 | 1.00 | 16.0-18.0 | 0.75 |
Performance
| T.S. min | Y.S. min | EL min% | HARDNESS( max) | ||
| Mpa | Mpa | 50mm | HBW | HRB | HV |
| 420 | 205 | 22 | 183 | 89 | 200 |
Hot rolled stainless steel coil
Cold rolled stainless steel coil
Stainless steel coil packing
Factory Information:
DSM has obtained ISO9001:2008,TS16949,BV and SGS certification. During our 19 years of working on 400 series stainless steel and special metal semimanufactures, Shanxi DSM has been proudly serving over 8000 customers in both domestic and oversea markets and various industries including Aviation, Automobile, Petrochemical, Textile, Hardware, Medical Apparatus, Electronic Product, Kitchenware and Cutlery.
Company Information:
Shanxi Disiman Special Metal Technology Co., Ltd
Dedicating to 400 series and special metal, DSM is a leading enterprise specializing in trading, processing, marketing and delivering. We have cold rolling and Precision Strip Steel factories together with advanced processing instruments, including but not limit to multiple Sendzimir Mills, AGC Four-high Mill, Annealing line, Degreasing Machine, Withdrawal Straightener, Decoiler Machine and Slitting Machine. High quality of end products will be guaranteed on multiple indexes such as hardness,tensile strength, yield strength, elongation, composition and Metallography.
DSM has five major processing factories located in Taiyuan, Wuxi, Foshan, Tianjin, Yangjiang and a branch office in Shanghai.We have most of the those famous steel mills in China as our suppliers and as well as a spot trading platform for 400 series with complete specifications and more than fifteen thousand tons of inventory reserve. As a front-end workshop for steel product manufacturers, we can customize steel belt with thickness from 0.08 to 60 mm and width from 4.6 to 1800 mm.
DSM has obtained IS09001:2008, TS16949, BV and SGS certification. During our 19 years of working on 400 series stainless steel and special metal semi-manufactures, Shanxi DSM has been proudly serving over 8000 customers in both domestic and oversea markets on various industries including Aviation, Automobile, Petrochemical, Textile, Hardware, Medical Apparatus, Electronic Product, Kitchenware and Cutlery.
Having the foothold in China, having the world in view', we step forward to develop steel deep processing, create our own manufacture and distribution cluster as well as extend the whole industry chain. With the belief 'Top client, Top quality', we are going to build DSM as a 400 series iron city!
We have supporting Cold Rolling and Precision Strip Steel factories together with advanced processing instruments, including but not limit to Sendzimir Mills (more than 20 sets), AGC Fourhigh Mill, Annealing line, Degreasing Machine, Withdrawal Straightener, Decoiler Machine and Slitting Machine. High quality of end products would be guaranteed on multiple indexes such as hardness, tensile strength, yield strength, elongation, composition and Metallography.
FAQ:
| 1 | Q: Can you provide the samples and how long can i get samples? A:Yes,we could offer the samples for free charge but the cost of freight be paid by customers.And generally speaking ,customized samples will take about 7-10 days. |
| 2 | Q: What is the MOQ about products? A:Flexible quantity according to your need. |
| 3 | Q: How long can make the delivery? A:For stock products,can make shipments 7-10 days after receiving desipot or L/C;For products need new production for common materials ,make shipments in 15-25 days;For products need new production for special and rare materials, usually need 30-40 days to make shipment. |
| 4 | Q: How does your company control quality? A:According to the standard for production.And we can also accept the third-party inspection. |
| 5 | Q: What is your payment terms? A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment or 100% Irrevocable L/C at sight |
