Audited Supplier
CYX19-IIC
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Integration
Stainless Steel
Four-Wire
Liquid
CE
Customized
-40ºC~85ºC
2 Times Full Pressure Scale
5±0.1V DC or 3.3±0.1V DC
-40ºC~125ºC
Gauge / Absolute
Huatian
Standard Package
Tianshui, Gansu, China
Product Description
The sensor can transfer the measurement signals of temperature, pressure and liquid level to I2C digital output. With the fast and accurate interface, the sensor is used to build an Internet of Things using a microcontroller. It can read data and control power on and off to reduce power consumption through microprocessor operation.
- Digital compensation for sensor offset, sensitivity, temperature drift and nonlinearity
- 32-bit customer ID field for module traceability
- Digital output of temperature and pressure in I2C bus mode
- Fast power-on to data output response: 3ms
- Low power consumption, sleep mode operation, as low as 5 μ A, current consumption depends on the programmed sampling rate
- Operating temperature: -40°C to + 85°C
- Wide supply voltage capability: 3.3V/5V
| Range | -100kPa…0kPa~10kPa…100MPa | Pressure form | Gauge / Absolute |
| Power supply | 5±0.1V DC or 3.3±0.1V DC | Accuracy | ±0.5%FS (pressure) ±0.5ºC (temperature) |
| Overload | 2 times full pressure scale | Long term stability | ±0.2%FS/year |
| Operating temperature | -40ºC~85ºC | Storage temperature | -40ºC~125ºC |
Material
- Diaphragm: stainless steel 316L / titanium TA1
- Shell: stainless steel 316L / titanium TC4
- Pressure lead-in tube: stainless steel 316L
- Pin lead: gilded Kovar
- Sealing ring: NBR
Connection
| VCC | SCL | SDA | GND |
| red | yellow | blue | black |
Data measurement acquisition operation
1. For read and write operations, the master device commands to start, and sends an ACK(acknowledgement) as a slave device to indicate success. The factory address of the slave device is 0x28, and the communication sequence is shown in Figure 3.
2. Read data sequence is as follows(Figure4, 5)
Figure 3
Figure 4
Figure 5
3.Read pressure typical value| Parameters | Typ | Unit |
| Zero pressure output (5%) | 333 | hex |
| Zero pressure output (10%) | 666 | hex |
| Full-scale pressure output (90%) | 399A | hex |
| Full-scale pressure output (95%) | 3CCB | hex |
Structure
| Range | Outline drawing |
| -100kPa~10MPa | |
| 25MPa~100MPa | |
