Audited Supplier
YM-KP
Product Line
New
Automatic
Overseas Service Center Available
High Production Efficiency
Greatly Improves The Production Efficiency
Youngmax
Wooden
2650x3100x2000mm
Guangdong Foshan
Product Description
Stainless Steel Aluminum Electric Kettle Making Machine/Kettle Production Line
The machines involved in a kettle production line can include:
1,Pneumatic Punching Machine: This machine is used for punching ventilation holes and decorative holes on the body or lid of pots to improve production efficiency and punching accuracy.
Hydraulic Press Machine: It's used to stamp stainless steel sheets into the body and bottom of kettles to ensure molding quality and dimensional accuracy.
3,Outer polishing Machine: The outer polishing machine is used to polishing the outer surface of the kettle to remove surface burrs, scratches and other defects, making it smooth and bright
4,Automatic Cleaning Line: It can effectively remove oil, dust and other impurities on the internal and external surfaces of the kettle to ensure that the quality of the product meets hygiene standards.
5,Multi Punching Machine: In kettle production, it can be used to punch multiple holes at once, such as decorative holes on the body of the kettle and ventilation holes on the lid, etc., to improve production efficiency.
6,Multi Spot Welding Machine: it can be used to multi-point weld the body to the bottom of the kettle, the lid to the body and other parts of the kettle, to ensure that the weld is strong and well sealed, to enhance the durability and safety of the product..
7,Brazing Machine:It's used to weld parts such as spouts and handles to ensure strength and sealing of joints.
8,Rolling Machine:used to roll stainless steel sheets into rounded bodies or lids to ensure roundness and dimensions are as designed.
| Description | unit | YZ28G-150 | YZ28G-200 | YZ28G-250 | YZ28G-300 | YZ28G-350 | |
| Nominal force | kN | 1000 | 1500 | 1500 | 2000 | 2500 | |
| Hydraulic system rated working pressure | MPa | 20 | 20 | 20 | 25 | 20 | |
| Return nominal force | kN | 110 | 140 | 140 | 180 | 125 | |
| Nominal force of lower cylinder blank holder | kN | 500 | 500 | 1000 | 1000 | 1000 | |
| Lower cylinder liquid maximum working pressure | MPa | 20 | 20 | 26 | 26 | 26 | |
| Nominal force of return cylinder | kN | 30 | 30 | 30 | 30 | 30 | |
| Lower piston maximum stroke | mm | 250 | 300 | 300 | 300 | 300 | |
| Maximum stroke of return cylinder | mm | 200 | 200 | 200 | 200 | 200 | |
| Maximum travel of movable beam | mm | 540 | 550 | 550 | 550 | 600 | |
| Distance from movable beam to work surface | Max | mm | 940 | 950 | 950 | 1000 | 1110 |
| Min | mm | 400 | 400 | 400 | 450 | 510 | |
| Lifting speed of movable beam | No-load downlink | mm/s | 350 | 350 | 350 | 350 | 400 |
| pressurized | mm/s | 41 | 36 | 36 | 32 | 21/35 | |
| return stroke | mm/s | 350 | 350 | 350 | 345 | 400 | |
| Blank holder piston speed | Up | mm/s | 125 | 160 | 115 | 115 | 115 |
| Down | mm/s | Follow beam | Follow beam | Follow beam | Follow beam | Follow beam | |
| Motor power | kW | 31 | 36 | 36 | 49 | 36 | |
| Effective area of worktable (left and right × front and rear) | mm2 | 650×750 | 700×880 | 700×880 | 750×900 | 800×990 | |
