Audited Supplier
316L
Powder
AISI316
Low Carbon
in Drums of 50kg Net Each, on Pallets
China
72181000
Product Description
Powder metallury (P/M) pressing and sintering, metal injection molding ( MIM ), sintering filter, chemical fibre spinning material - stainless steel grits, hot spraying (supersonic spraying), metal blasting and so on.
| Commodity | Stainless Steel in Powder | ||||||||
| Type | Cr % | Ni % | Mo % | Sn % | Cu % | C % | Si % | Mn % | Fe % |
| 304L | 18 - 20 | 8-12 | - | - | - | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 316L | 16 - 18 | 10-14 | 2-3 | - | - | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 317L | 18 - 21 | 13 - 16 | 3-4 | - | - | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 11-9 | 24 - 27 | 18 - 21 | - | - | - | ≤ 0.20 | 1.5 - 2.5 | ≤ 1.5 | Balance |
| 11-5 | 24 - 26 | 19 - 22 | - | - | - | ≤ 0.08 | ≤ 1 | ≤ 2 | Balance |
| 303L | 17 - 19 | 8-13 | S: 0.2 | - | - | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 304LSC | 18 - 20 | 10-12 | - | 1-1 | 1-2 | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 303LSC | 17 - 19 | 8-13 | S: 0.2 | 1-1 | 1-2 | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 316LSC | 16 - 19 | 10-14 | 2-3 | 1-1 | 1-2 | ≤ 0.03 | ≤ 1 | ≤ 2 | Balance |
| 409L | 10.5 - 11.8 | - | Ti or Nb: 8*C - 0.8 | ≤ 0.03 | ≤ 1 | ≤ 1 | Balance | ||
| 410L | 11.5 - 13.5 | - | - | - | - | ≤ 0.03 | ≤ 1 | ≤ 1 | Balance |
| 430L | 16 - 18 | - | - | - | - | ≤ 0.03 | ≤ 1 | ≤ 1 | Balance |
| 434L | 16 - 18 | - | 0.75 - 1.25 | - | - | ≤ 0.03 | ≤ 1 | ≤ 1 | Balance |
| 2-13 | 11.5 - 13.5 | - | - | - | - | ≤ 0.15 | ≤ 1 | ≤ 1 | Balance |
| 2-23 | 12-14 | - | - | - | - | ≤ 0.25 | ≤ 1 | ≤ 1 | Balance |
| 17-4PH | 15.5 - 17.5 | 3-5 | Nb: 0.15 - 0.45 | 3-5 | ≤ 0.07 | ≤ 1 | ≤ 1 | Balance | |
| 10-30 | 18 - 20 | 8-12 | - | - | - | ≤ 0.08 | ≤ 1 | ≤ 2 | Balance |
| 11-11 | 16 - 18 | 10-14 | 2-3 | - | - | ≤ 0.08 | ≤ 1 | ≤ 2 | Balance |
| Particle Size | -100 mesh (150µ m) for PM, -400 mesh (38µ m) for MIM or as your request. | ||||||||
| Packing | in plastic drums with inner plastic bags of 25Kg net each on pallets, or 1000Kgs plastic woven bags or as your request. | ||||||||
| Uses | powder metallury (P/M) pressing and sintering, metal injection molding ( MIM ), sintering filter, chemical fibre spinning material - stainless steel grits, hot spraying (supersonic spraying), metal blasting and so on. | ||||||||
| Remarks | if you will have the requirements about specifications, please don' t hesitate to contact us so as to study it and meet your demands. | ||||||||
