Audited Supplier
STK-4040-1
2kg
40*5*40cm
Seaworthy Package
Stainless Steel Membrane Housing
2 Piece
SS304/316L
Available
RO System
Filtration
Reclaimed Water, Groundwater, Municipal Tap Water
Food/Medical/Electronics/Chemical Plants
COVNA STARK
40*5*40CM
China
Product Description
Membrane housing belongs to the terminology of composite materials. Usually there are glass fiber reinforced plastic membrane shell, stainless steel membrane shell, ceramic membrane shell, the models are various, and the models are different according to different functions.
SS RO Membrane Housing
The 4-inch/8-inch side-port membrane housing product has a working pressure of 300psi-1200psi, and can transfer 1-6 cores of membrane elements, which is applicable to a variety of international standard membrane elements. The product has obtained the domestic quality system certification. ISO9001 ,ISO14001,CE. The manufacturing of membrane housing conforms to JC692-1998 standard. The product is applicable to a variety of complex media environments. It is applied to many large engineering projects at home and abroad.4040 membrane housing is divided into two types: seamed and seamless, and is made of SUS304 stainless steel. Both ends are sealed with ABS head and silicone O-ring, with high sealing performance and long service life.
| Gross weight | 2kg |
| Length | 40cm |
| Width | 5cm |
| Height | 40cm |
| Pressure | 300psi |
4040 Stainless steel RO membrane housing more picturesReverse osmosis and nanofiltration membrane membrane shells generally use glass fiber reinforced plastic or stainless steel, because they have to withstand greater pressure. Ultrafiltration membrane membrane shell generally uses UPVC or ABS, because the operating pressure of ultrafiltration is generally low (generally less than 0.3Mpa). UPVC pipes can be used to make small ion exchange beds in addition to membrane shells in water treatment equipment. Common materials are stainless steel
8040 membrane housing: there are two types: ferrule and end cap. It is made of SUS304 seamless stainless steel pipe. It has good sealing performance, high pressure resistance, and will not age. It is convenient to install and clean the membrane. Working pressure (MPA): 4.0. The module housing inlet and outlet can be end inlet (outlet) or side inlet (outlet) according to customer requirements. Stainless steel membrane housings are 2.5 inch, 4 inch, 8 inch, etc.4inch membrane housing has 1-core, 2-core, 3-core, 4-core and other series.
The membrane shell tube is divided into two types: seamed tube and seamless tube: The seam tube is automatically welded and formed, and the welding is uniform and flat. The internal and external surfaces are mirror treated. The pressure test is carried out before leaving the factory, and the pressure is up to 16KG The seamless pipe is directly pulled out with the section blank, the wall thickness is uniform, and it is not easy to leak. The internal and external surfaces are subject to mirror treatment. The pressure test is carried out before leaving the factory, and the pressure is up to 25KG.
There are two connection modes of water inlet and outlet: side inlet and end outlet; The specifications are 3/4" x 1/2" and 1/2" x 1/2".
Head materials include ABS and stainless steel.
Classification/applicationMembrane housing classification/application The membrane shell is divided into eight-inch membrane shell (8040) and four-inch
membrane shell (4040). The membrane shell has one core, two cores, three cores...seven cores. (8040,,8080,80120...80280) Commonly
used membrane shells are mainly used in seawater desalination and sewage treatment
ABOUT US
STARK Environmental Solutions Ltd. is a company that focuses on water treatment plant and is committed to the research and development, production, sales and after-sales service of environmentally friendly water purification industrial products. The main production and operation of water treatment plant: reverse osmosis system, ultrafiltration system, EDI desalination system, sea water desalination plant, brackish water desalination plant. Products are widely used in electronics, electroplating, power plants, medicine, petroleum, chemical, food and beverage, printing and dyeing industries. Stark strives to be the forefront explorer of water treatment equipment at home and abroad!
1. There are many unqualified products in the market, how can you make sure your quality control?
We have passed SGS, ISO:9001,certification.Eeah pcs of the goods would be checked several times strictly before shipping,and we are glad to accept the Third- party inspection company to quality check. And we will full refund in case of any bad quality.
2.What about the delivery time?
About 7~30 Working days.
3.How about your production capacity, and how can you make sure my goods would be delivery on time ?
We have 12 production lines, six quality inspection teams, and hundreds of skilled workers who have worked for more than five years. The delay rate in the last years has been less than 0.3%.
4.How about your design ability? Do you offer OEM service?
We have our own design department, and have offered design service for thousands of cooperative partner. OEM accept and we offer confidentiality agreement "business secret contract" for your design safe.
5.Can l place a small order to test the quality?
Yes sure ,small order are also welcomed.
6.Can I visit your factory?
Sure , welcome to visit our factory.
We will 100% inspect the products before shipment.
