Audited Supplier
Water
High Temperature
Manual
Stainless Steel
Low Pressure
Unidirection
Solenoid Valve
Drain
DIN, ANSI
SS304, SS316L
EPDM, Silicone, FKM
Less Than or Equal to 0.4um
150 Degree Celsius
0.4 ~ 0.6MPa
R1/8"
C-Top Intelligent Controller or Two Proximity Swi
eraval
Packing in Cartons and Wooden Cases
1"~4" or DN40~DN150
Made in China
8481804090
Product Description
| Tank bottom diaphragm valve |
Description:
Tank bottom valves are mainly used in thepharmaceutical, food and beverage industries. Theyare generally installed at the bottom of tanks to playthe role of sampling and drainage. They can also beintegrated for SlP/ClP, The tank bottom valve isevolved on the basis of the diaphragm valve. ltssealing weir is as close as possible to the tank wal!to avoid dead corners at the bottom of the tank.
Tank bottom valves are mainly used in thepharmaceutical, food and beverage industries. Theyare generally installed at the bottom of tanks to playthe role of sampling and drainage. They can also beintegrated for SlP/ClP, The tank bottom valve isevolved on the basis of the diaphragm valve. ltssealing weir is as close as possible to the tank wal!to avoid dead corners at the bottom of the tank.
| Parametric technique: |
| Working pressure | 0-10bar,145psi(EPDM) |
| 0-7bar,101psi(EPDM+PTFE) | |
| Operating temperature | -40~130ºC(EPDM) |
| -40~150ºC(EPDM+PTFE) | |
| Driving mode | Manual / Pneumatic |
| Valve body material | SS316L |
| Surface treatment | The outer surface is sandblasted |
| Internal surface treatment Ra ≤ 0.375μm | |
| Connection mode | Welding / Clamp end |
| 3A,ISO,DIN,ASNE BPE |
