Audited Supplier
Joint Tape
Decorative Elements
BSCI
White
Glossy
Adhesive Bonding
Houseware
Strengthen, Rot Proof, Waterproof, Soundproof
Tape
Kysun Tape
Carton
38mmx50M
Ningbo China
Product Description
Paper Drywall Joint Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering. It is super strong both wet and dry. The tapered edges offer invisible seams. It can be stuck to plasterboard, cement and other building materials completely and prevent against the cracks of wall and its corner. Meanwhile, it can use together with fiberglass self-adhesive mesh tape, make the building decoration and installation easier.
SPECIFICATION
Item Unit Standard Value
Unit Weight G/M2 145± 5
Tear Strength(Vertical/Horizontal)≥ MN*M2/G 9/10
Thickness mm 0.215-0.235
Sparkper Forated Strength≥ KPa m2/g 1.8
Tensile Strength Dipped Water≥ KN/m 1.2/0.7
Wet Absorb G/M2 35
Minimum Fiber Adhesive Froce % 50
| PACKAGE |
| Width(mm): 50 |
| Length(m): 75, 90, 150 |
| Each roll is wrapped in plastic bag, then 10/20 rolls to be put in one carton. |
How to Finish Wallboard Joints:
1. Firmly press joint compound into wallboard joints over an approximate 4" Wide area.
2. Center Joint Paper Tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess.
3. Make sure nail heads are driven in at least 1/32" . Apply joint compound to nail head indentations.
4. After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3" - 4" Width on each side. Apply second coat to nail heads.
5. Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8" On each side. Apply final coat to nail heads.
6. When completely dry, at least 24 hours after final coat, sand smooth.
Finishing Inside Corners: Apply compound to both sides of corner. Crease tape and embed. Apply a thin coat on both sides of tape. When dry, apply a second coat to one side only. Let dry, then finish the other side. When dry, sand until smooth.
Finishing Outside Corners: Use broad knife to apply the joint compound over the corner bead flange for the outside corners. The first coat should be approximately 6" Wide, and the second coat 6" - 10" Wide applied on each side of corner.
FAQ:
Q: Are you the trader or manufacturer?
A: We are a professional manufacturer of Adhesive Tapes.
Q:What is your company specialized in?
A:A professional manufacturer and exporter in Ningbo to offer various of adheisve tape.
Q:Why should we choose you?
A:1-Our company Have 15 Years' Production Experience;?
2-SGS Audited Supplie;
3-Short Delivery: 1 Set Coating Machine, 4 Sets Tape Slitters, 2 Sets Blister seal Machines;
4-More Than 40 Various Adhesve Tape Available;
Q:How about your company team?
A:1-We have been ready to open up the ODM&OEM business with our clients.
2-Our team receives several trainings per year regarding sales and communication with customers.
3-Technical training is regularly held every month.
Q:What is your terms of payment?
A:We accept L/C,T/T and Western Union
