Audited Supplier
Single Pointer Pressure Gauge systems monitor mud pump operations to accurately and efficiently detect potential problems. This 6" gauge has proven itself to be the most cost gauge comes in Box mount or Panel mount configurations. A system consists of a 6" Pressure Gauge, Gauge Protector (Rubber diaphragm type or Piston Separator type), a high-pressure Hose and a hand pump.
Dual-pointer pressure indicator systems deliver accurate measurements for mud, cementing, acidizing, and fracturing operations
WHEN ORDER PLEASE SPECIFY
1. Required capacity and English or Metric divisions
2. Gauge mounting
3. Diaphragm protector, 1:1 piston isolator or 4:l debooste
4. Hose length
5. Single pointer or dual pointer (compound) gauge
1. 6" dial face on gauge allows clear viewing firom long distance.
2. Rugged design over years of service has proven this gauge to be accurate and dependable in extreme conditions.
3. Flexibility of mounting design allows gauge to be mounted in a drillers console, bracket or panel mounted in a pumping truck
4. 360 degree calibration allows operator to viewthe smallest pressure changes
5. Damper allows operator to adjust gauge sensitivity to ensure accurate readings in all kindof pumping conditions
6. Fluid filled to protect the gauge from rig vibrations and frosting in winter
| Standard capacities include: MPA | 0-7 mpa, 0-14 mpa, 0-21 mpa 0-35 mpa 0-42 mpa, 0-60 mpa, 0-80 mpa, 0-100 mpa |
| Standard capacities include: psi | 0-4000, 0-8000, 0-12000, 0-16000 |
| unit availiable | PSI MPA or BAR |
| CONNECTION | 2" Weco 150 nut and female sub |
| Operating temperature | -40. ~+65 ºC |
| Hose length | standard 15 meter OR as client requirement |
TONG TORQUE AND TONG LINE PULL INDICATION SYSTEMS
PUMP STROKE COUNTER/RATE METER
WEIGHT INDICATOR AND DEADLINE ANCHOR
