Audited Supplier
STARDRAWING Shipping Container Lifting Jacks 40T 50T 1.6M 1.8M Options
1) Well clamp 4 lifting devices to slots at 4 corner fittings of an ISO container;
2) Connect a quick coupling set to each lifting device as per instructions;
3) Connect the power supply, test run and eliminate any abnormalities, adjust the height to the container bottom and connect the steel wire rope;
4) Lift the container roughly 15cm or so above the transporter through remote control;
5) Remove the container transporter;
6) Lower the container on the ground for loading/unloading and lift back the container to the transporter platform.
2) Simple structure ensures convenience and efficiency in operation;
3) No crane/forklift loading/unloading cost.
| Electric power supply | Load capacity | Hydraulic system rated pressure | Lifting height |
| 220/380V | 40Ton | 16MPa | 1.6/1.8M |
| 220/380V | 50Ton | 16MPa | 1.6/1.8M |
Wireless Remote Control Operation Procedure
1) Press ON button to activate remote control3) Press the ALL button, long press the UP or DOWN button to control A/B/C/D hydraulic cylinders go up or down simultaneously.
4) Press A/B/C/D button, long press the UP or DOWN button to control A/B/C/D hydraulic cylinder to go up or down accordingly.
5) Long press the UP button, then the hydraulic cylinder will extend out and will stop when the button is unpressed.
6) Long press the DOWN button, then the hydraulic cylinder will retract back and will stop when the button is unpressed.
7) Press the PUMP-OFF button to turn off the 4 hydraulic pump stations
8) Press the E-STOP button to disconnect
9) Press the OFF button to stop remote control operation
Dear : Can I get free caster wheel samples from Stardrawing ?
STAR : We would be honor to offer you free caster samples, and we believe that you would be willing to pay for the freight fee for such good products. Please provide your DHL/FedEx or other freight collect number and advise which express type should be chosen, international express type(2~3days) or economic type (4~5days).
Dear : What is your payment terms of caster ?
STAR : It is undisputable and crystal clear that 30% advanced payment, 70% before shipment, hope we have reached agreement for this regular payment manner.
Dear : What about your lead time ?
STAR : Usually, caster sample needs 5-7 days, mass production time needs 30 days. It is up to the quantity and stocking.
STAR : Sure.
Option 1 - Build the molds and fixtures upon your sample or technical drawings
Option 2 - Add your logo on fork or wheel
Option 3 - Pack the casters in your branded carton
