Steel-Lined Natural Rubber Pipes, Extremely Wear-Resistant, Pipe

Product type-description:

Rubber lined spool is steel or other hard material spool with inside wearing resistant, corrosion resistant or heat resistant rubber as liner to reduce the impact or corrosion from the media by its own physical and chemical properties of rubber. The benefit of energy absorption significantly increase the service life of the pipe line and this will dramatically reduce the end user's cost.

SD Pipe is well equipped with fully set-up rubber lining workshop for both hot curing and cold bonding rubber lining process. We can supply spools with different liners according to your unique application and requirement. Hot curing rubber lined spool is cost-effective product with extremely high bonding strength which suits all the general application. And Premium Linatex cold bonding rubber lined pipe can give you remarkable wear resistant performance to fit your high wearing application.

SDPipe delivers batches of pipes and spools to Sino Iron of CITIC Pacific Mining include Primary cyclone feed pipe line (PCFD), Secondary cyclone underflow pipe line, tailing pipe line and etc. The PCFD pipe line, as the most wearing area, is lined by 25mm Linatex Premium nature rubber to give the best performance. And the tailing pipe line uses normal nature rubber with hot bonding process as liner.

Product Characteristics:

1.High Temperature Resistance--operating temperature is 250ºC
2.Low Temperature Resistance--good mechanical toughness.Even if the temperature drops to -196ºC, it can also keep the elongation at 5%.
3.Corrosion Resistance--For the majority of chemicals and solvents,it shows inertia. Resistance to strong acid,strong alkali, water and all kinds of organic solvents.
4.Weather Resistance--best aging life of plastic
5.High Lubricating Property--the lowest friction coefficient in solid materials
6.Inadhesion-- the minimum surface tension in solid materials, and does not adhere to any material
7.Nonhazardous--no biological toxicity

Production range:

1.nominal diameter:DN20mm-DN1200mm(Large-diameter pipe can reach 4m).
2.All kinds of non - standard elbows,tees and reducings.
3.Can be prefabricated according to user requirements.

Production range:

1.nominal diameter:DN20mm-DN1200mm(Large-diameter pipe can reach 4m).
2.All kinds of non - standard elbows,tees and reducings.
3.Can be prefabricated according to user requirements.

Jingjiang Jiafei Trading Co., Ltd.(JiangSu ShuangDa Pump Industry Co., Ltd. )is located in Xinqiao Industrial Park of Jingjiang Economic Development Zone----in the north shore of Jiangyin Yangtze River bridge.Our company is a national hi-tech enterprise,Jiangsu innovative enterprise,Jiangsu " good contract & good faith "enterprise and "AAA" quality credit enterprise.It's an integrated enterprise group which is engaged in pumps,pipes,chemical equipment,heat-resistant and wear-resistant steel castings.
Registered capital:68.88 million yuan. Total area:0.23 million square metres .Existing building area:0.13 million square metres. Existing employees:345,including 215 workers above college degree,15 senior engineers and 68 engineers.

Leading Products:Pump: chemical process pumps(BB1~BB5,VS1~VS6 series)carry out the latest edition of API610;residual heat removal pump,medium pressure safety injection pump, low pressure safety injection pump .(AP1000/CAP1400/CAP1700/ACPR1000)carry out RCC-M/ASME standard;SDQL forced circulation pump used in salt chemical and environmental protection industries; SDZA gasification key pump used in coal chemical industry;large seawater desalination pump.

Pipe:pipes can be fabricated in the shop according to user requirements.We provide nano polyester new material pipe, two component solvent-free epoxy resin pipe,plastic-lined composite steel pipe, tetrafluoroethylene-lined composite steel pipe,glass-lined composite steel pipe.