Audited Supplier
Steel Structure Bailey Bridge Prefabricated Bailey Bridge Metal Bailey Bridge Prefab Portable Bailey Bridge Steel Bailey Bridge Prefab Assembly Bailey Bridge Panel Bailey Bridge
The Type 321 plate bridge and the Type 200 plate bridge are a detachable and quickly erected bridge system. It is based on the British Compact-100 Bailey Bridge. The whole bridge is welded from high tensile strength steel. The main beam is a lightweight composite plate, and the panels are connected by panel connecting pins. The conversion between parts is easy, and they are very light. Easy to assemble or disassemble and transport. It can also be assembled into different forms of plate Bridges according to its span length and transportation requirements. Therefore, as a more developed and secure emergency transport bridge, it has been widely used.
Because the bridge floor is thin and the beam is light, it is suitable for occasions where the bridge span or load is small.
With the development of the international market, some international users insist on using a bridge of British size to match the old bridge, and the Great Wall can also provide a special bridge with a panel size of 3.048mX1.45m(hole center distance). In China, it is known as the British Type 321 and Type 200 Bailey Bridge.
| ZB321(100) truss press limited table | |||||||||
| No. | internal force | structure form | |||||||
| not reinforced model | reinforced model | ||||||||
| SS | DS | TS | DDR | SSR | DSR | TSR | DDR | ||
| 321(100) | standard truss moment(kN.m) | 788.2 | 1576.4 | 2246.4 | 3265.4 | 1687.5 | 3375 | 4809.4 | 6750 |
| 321(100) | standard truss shear (kN) | 245.2 | 490.5 | 698.9 | 490.5 | 245.2 | 490.5 | 698.9 | 490.5 |
| 321 (100) Table of geometric characteristics of truss bridge(Half bridge) | |||||||||
| Type No. | Geometric characteristics | structure form | |||||||
| not reinforced model | reinforced model | ||||||||
| SS | DS | TS | DDR | SSR | DSR | TSR | DDR | ||
| 321(100) | Section properties(cm3) | 3578.5 | 7157.1 | 10735.6 | 14817.9 | 7699.1 | 15398.3 | 23097.4 | 30641.7 |
| 321(100) | Moment of inertia(cm4) | 250497.2 | 500994.4 | 751491.6 | 2148588.8 | 577434.4 | 1154868.8 | 1732303.2 | 4596255.2 |
| ZB200 truss press limited table | |||||||||
| NO. | internal force | structure form | |||||||
| not reinforced model | reinforced model | ||||||||
| SS | DS | TS | QS | SSR | DSR | TSR | QSR | ||
| 200 | standard truss moment(kN.m) | 1034.3 | 2027.2 | 2978.8 | 3930.3 | 2165.4 | 4244.2 | 6236.4 | 8228.6 |
| 200 | standard truss shear (kN) | 222.1 | 435.3 | 639.6 | 843.9 | 222.1 | 435.3 | 639.6 | 843.9 |
| 201 | high bending truss moment(kN.m) | 1593.2 | 3122.8 | 4585.5 | 6054.3 | 3335.8 | 6538.2 | 9607.1 | 12676.1 |
| 202 | high bending truss shear(kN) | 348 | 696 | 1044 | 1392 | 348 | 696 | 1044 | 1392 |
| 203 | Shear force of super high shear truss(kN) | 509.8 | 999.2 | 1468.2 | 1937.2 | 509.8 | 999.2 | 1468.2 | 1937.2 |
| ZB200 Table of geometric characteristics of truss bridge(Half bridge) | ||||
| structure | geometric characteristics | |||
| geometric characteristics | chord area(cm2) | Section properties(cm3) | Moment of inertia(cm4) | |
| ss | SS | 25.48 | 5437 | 580174 |
| SSR | 50.96 | 10875 | 1160348 | |
| DS | DS | 50.96 | 10875 | 1160348 |
| DSR1 | 76.44 | 16312 | 1740522 | |
| DSR2 | 101.92 | 21750 | 2320696 | |
| TS | TS | 76.44 | 16312 | 1740522 |
| TSR2 | 127.4 | 27185 | 2900870 | |
| TSR3 | 152.88 | 32625 | 3481044 | |
| QS | QS | 101.92 | 21750 | 2320696 |
| QSR3 | 178.36 | 38059 | 4061218 | |
| QSR4 | 203.84 | 43500 | 4641392 | |
Q1: Are you trading company or manufacturer ?
A: We are a manufacturer engaging in the field of metal products for more than 20 years.
Q2:How much is the freight ?
We will decide according to your mode of shipping and quantity, it needs you to provide us specific mode of transportation(by sea or air),which port or airport to arrive at.
Q3: Do you accept retail order? What is the MOQ required?
A: Yes, we accept retail order. MOQ is negotiable, free to contact us for discussion.
Q4: Do you provide ODM/OEM service?
A:Yes. OEM&ODM is available, you can show us the design plan, and it is better to ship us your original sample.
From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.
Q5:Can you provide samples?
A:Yes. We can ship your sample via DHL, UPS, Fedex, TNT, EMS etc. Please feel free to contact us for details
Q6. How do I place an order?
A: Please try to provide the following information:
* Product information: specifications, quantity, delivery requirements
*Payment
* Shipping information: name, detailed shipping address, phone number, shipping requirements (courier, air or sea).
* If there is a cooperative freight forwarder, please provide the contact information of the freight forwarder.
* Please send us an official purchase order by email. or we can provide proforma invoices for you.
